Ardesto EKL-X53E - Инструкция по эксплуатации - Страница 18

18

EN

USEFUL NOTES

•  To prolong the life of the kettle, do not leave the water 

overnight, empty the water after use.

•  If you accidentally turn on an empty kettle, when the 

kettle is heated, the protection against operation 

without water will work, the kettle will turn off. Let the 

kettle cool for 10 minutes before refilling it with water.

•  Attention: 

Frequent switching on of the device 

without water may damage the protection system, so 

always check that there is water in the kettle before 

switching it on. Make sure the water level in the kettle 

is above the Min mark.

•  Attention: 

the surface of the heating element remains 

hot after use.

•  If your kettle switches off before water boiling, you 

have to descale the kettle.

DESCALING

•  The frequency of descaling depends on the hardness 

of the water and how often the appliance is used.

•  If the appliance is switched off before the water boils, 

it may need to be decalcified.

•  Use a special decalcifying agent.

•  Use only the quantity indicated in the instructions for 

the decalcifying agent.

•  Fill the kettle with a solution of a special decalcifying 

agent up to the maximum mark and boil.

•  Leave the solution in the kettle for several hours.

•  Pour out the solution, fill the kettle with clean water 

up to the maximum mark and boil. Pour out the 

boiled water. Repeat the procedure few times.