Ardesto EKL-X53E - Инструкция по эксплуатации - Страница 16

16

EN

HOW TO USE

•  Remove the kettle from its power base unit.

•  Press the lid release button and pull lid back. 

•  Use only purified water.

•  Do not overfill the kettle over the Max level because 

boiling water being ejected from the spout while 

operating. The minimum amount of water should reach 

the Min marking.

•  Fill with the desired amount of water and close the lid. 

To close lid simply press the lid.

•  Place the kettle filled with water on the base.

•  Connect the appliance with power source, then all the 

indicators turn on and the display shows the real-time 

water  temperature. The  indicators  of “50”, “60”, “70”, “80” 

and “90” illuminate solidly while the indicator of default 

setting “Boil” flashes, and the appliance is ready for use.

NOTE: All the indicators will turn off and three beeps 

can be heard as well as the appliance will enter into the 

standby mode if there is not any operation for 1 minute.

•  Press “+” or “-” button to select your desired water 

temperature. The indicator of the selected water 

temperature flashes while other indicators illuminate 

solidly.

•  Press “START/CANCEL” button to activate the appliance, 

the indicator of selected water temperature illuminates 

solidly while other indicators turn off, the display shows 

the real-time water temperature, and the appliance 

starts to work. 

•  When the water is heated to the selected temperature, 

three beeps can be heard, all the indicators turn off and 

the appliance enters into the standby mode.

•  After selecting the desired water temperature, if you 

want to activate the keep-warm function, press the