Ardesto EKL-X52E - Инструкция по эксплуатации - Страница 17

17

EN

temperature, the default temperature is 100 °С.

•  NOTE: Press the ON/OFF button to interrupt the heating 

cycle at any time. The appliance will switch to standby 

mode.

•  If the kettle is removed from the base while the 

appliance is switched on, the heating cycle stops. The 

appliance is designed with a memory function. To retain 

the chosen settings, return the kettle to its base within 

30 seconds after it being lifted.

•  Once the water has reached the set temperature, the 

appliance stops heating, beeps 3 times, and switches to 

standby mode.

•  After boiling, allow the kettle to cool for 5 minutes 

before refilling with water.

•  Avoid sudden temperature changes when filling the 

kettle with water. Do not fill a hot kettle with cold water 

or a cold kettle with hot water.

•  Condensation may form on the surface of the base. It 

is formed during the automatic shutdown of the kettle 

due to the release of steam through the vents in the 

base of the kettle. Before reuse, remove condensation 

from the surface of the base with a tissue.

USEFUL NOTES

•  To prolong the life of the kettle, do not leave the water 

overnight, empty the water after use.

•  If you accidentally turn on an empty kettle, when the 

kettle is heated, the protection against operation 

without water will work, the kettle will turn off. Let the 

kettle cool for 10 minutes before refilling it with water.

•  Attention: 

Frequent switching on of the device 

without water may damage the protection system, so 

always check that there is water in the kettle before 

switching it on. Make sure the water level in the kettle