Ardesto EKL-X52E - Инструкция по эксплуатации - Страница 16

16

EN

best. The descaling interval depends on the local water 

hardness.

HOW TO USE

•  Remove the kettle from its power base unit.

•  Press the lid release button and pull lid back. 

•  Use only purified water.

•  Do not overfill the kettle over the Max level because 

boiling water being ejected from the spout while 

operating. The minimum amount of water should reach 

the Min marking.

•  Fill with the desired amount of water and close the 

lid. To close lid simply press the lid. Ensure that the lid 

is firmly closed, the kettle will not turn off if the lid is 

opened.

•  Place the kettle filled with water on the base.

•  Connect the power cable to the mains.

•  Press the ON/OFF button to switch on the appliance. 

The display will flash and shows 100 °С as the default 

preset temperature. If no temperature selection is made 

within 5 seconds, the appliance will start heating the 

water to the default temperature.

•  Press the TEMP button to select the required 

temperature. 

•  NOTE: The temperature selection cycles with each press 

of the TEMP Button: 40 °С, 50 °С, 60 °С, 70 °С, 80 °С, 90 °С, 

100 °С. When reaching 100 °С, the next press circles 

back to 40 °С. The default temperature is 100 °С. The 

Display will flicker during the temperature selection. 

When the required temperature is selected, wait 5 

seconds, the appliance will start heating the water. The 

Display will show the water real-time temperature.

•  NOTE: if there is no touching or selecting after 5 seconds, 

unit will start heating the water to the default