Ardesto EKL-X50 - Инструкция по эксплуатации - Страница 15

15

EN

switching it on. Make sure the water level in the kettle 

is above the Min mark.

•  Attention: 

the surface of the heating element remains 

hot after use.

•  If your kettle switches off before water boiling, you 

have to descale the kettle.

DESCALING

•  The frequency of descaling depends on the hardness 

of the water and how often the appliance is used.

•  If the appliance is switched off before the water boils, 

it may need to be decalcified.

•  Use a special decalcifying agent.

•  Use only the quantity indicated in the instructions for 

the decalcifying agent.

•  Fill the kettle with a solution of a special decalcifying 

agent up to the maximum mark and boil.

•  Leave the solution in the kettle for several hours.

•  Pour out the solution, fill the kettle with clean water 

up to the maximum mark and boil. Pour out the 

boiled water. Repeat the procedure few times.

CLEANING AND CARE

•  WARNING!

 Before cleaning, disconnect the device 

from the power supply.

•  Let the device cool down.

•  Never use abrasives or sharp objects (knives or 

hard brushes) to clean the device.

•  Never submerge the device in water. Never wash 

the kettle in the dishwasher.

•  Use a damp cloth to clean the outside of the kettle. 

Make sure that the electrical connectors are not wet.

•  If the color of the inside of the kettle body has