VITEK VT-1461 GY - Инструкция по эксплуатации - Страница 5

5

              ENGLISH         

3.  Put the gear lid (14) on the bowl (9) and 

turn clockwise till the clamp.

4.  Insert the motor unit (3) into the gear-lid 

(14) and turn anti-clockwise until bump-
ing.

5.  Use the speed control (1) to set the re-

quired speed. To switch on the unit press 
the button (2). During operation hold the 
motor unit (3) with one hand, and the 
chopper bowl (9) – with the other.

6. After usage disconnect the motor unit 

firstly (3), by turning it clockwise, and 
then remove the gear (14) by turning it 
clockwise.

7. Be careful while removing the blade 

(10).

8. Take the chopped products from the 

chopper bowl (9).

Note:

 You can keep the blender set on the 

(8), and the support itself (8) can be fas-
tened on the wall.

CLEANING

AT TENTION! The blades are very sharp 
and dangerous. Handle them carefully!

•  Unplug the unit before cleaning.
•  Remove the attachments
•  Use only a damp cloth to clean the motor 

unit (3). 

•  You can rinse the gears (14, 12) under 

tapping warm water, but never immerse 
them into water.

• After processing of salty and sour prod-

ucts it is better to rinse the blade (10) im-
mediately.

• While possessing products with strong 

dyeing properties (for instance carrot 
or beet-root) the attachments can get 
colored, wipe the attachments using a 
cloth, dampened in plant oil.

•  Wash the attachments and the bowl in 

warm soapy water, rinse and dry thor-
oughly. 

•  Do not wash the attachments if they are 

on the motor unit (3), always remove the 
attachments and then wash.

DO NOT IMMERSE THE MOTOR UNIT 
AND THE GEARS INTO ANY LIQUIDS, DO 
NOT WASH THEM WITH WATER OR IN A 
DISH WASH MACHINE.
NEVER WASH THE AT TACHMENTS IN A 
DISH WASH MACHINE.

Delivery set:

1 – Motor unit
2 – Removable blender attachment
3 – Bowl lid
4 – Bowl
5 – Attachment, protecting from scratches
6 – Support
7 – Chopper bowl
8 – Chopping knife
9 – Anti-slip mat
10 – Whisk gear
11 - Whisk
12 – Gear lid 
13 – Instruction manual – 1 pc.

Specifications

Power supply: 220-240 V ~ 50 Hz
Power consumption: 300 W

Specifications subject to change without 
prior notice.

Service life of  appliance -  3 years

GUARANTEE

Details regarding guarantee conditions can 
be obtained from the dealer from whom the 
appliance was purchased. The bill of sale or 
receipt must be produced when making any 
claim under the terms of this guarantee.

This product conforms to the 
EMC-Requirements as laid down 
by the Council Directive 89/336/
EEC and to the Law Voltage 
Regulation (73/23 EEC)

1461.indd   5

1461.indd   5

27.01.2010   11:23:41

27.01.2010   11:23:41