Блендер Scarlett IS-541 - Инструкция по эксплуатации - Страница 7

5

GB

INSTRUCTION MANUAL 

2.2 CHOPPING BLADE / CHOPPER 

•

Сhopper is ideal for chopping greenery and vegetables, 
cheese, majority of nuts, dried fruits. Hard products, 
such as meat, onion, carrots, need to be cut before 
processing. Nutshells must be removed, meat must be 
separated from bones and tendons. 

•

The chopper is not suitable for crushing ice and 
chopping hard products, such as coffee grains, 
nutmegs. 

•

Caution! The chopping blade is very sharp! Hold the 
blade by the top plastic area only!

•

Place the blade on the central finger in the jar. 

•

Add ingredients into the jar.

•

Cover the jar with the drive. 

•

Turn the bowl drive aligning the lock with the handle 
slot. The bowl drive will secure.

•

Place the motor base into the jar drive until tightened.

•

While chopping, hold the motor base with one hand, 
accessory jar – with the other hand. 

•

When finished, remove the motor base first. 

•

Detach the bowl drive by pressing fixing knob of the 
drive and turning it counterclockwise.

•

Then remove the jar drive.

•

Remove the blade carefully. 

•

At this point you may remove chopped ingredients from 
the jar. 

2.3 SUPPORTING DISC.

•

Supporting disc is used for slicing  and shredding  
vegetables, e.g. cucumbers, carrots, potatoes, onions, 
and some kinds of chees. 

•

Place one of replaceable blade into disc.

•

WARNING: replaceable blades are very sharp! Handle 
them with care!

•

To secure the blade in the disc, press it so that locked 
with the edge of the aperture.

•

Place the disc on the pin firmly.

•

Put the bowl on the drive.

•

Place the motor part on the bowl drive. 

•

CAUTION: Use the pusher only to feed products, push 
it evenly and gently. The heavier pressure, the coarser 
chopping.

2.4 ACESSORY FOR WHISKING / LIQUID PRODUCTS 

BLENDING

•

Use the whisk for creaming, eggbeating, desserts 
blending. Never use this accessory for kneading.

•

Insert the accessory into adapter and place them on the 
motor base. 

•

Prior to start processing, immerse the whisk into the jar 
with ingredients. 

•

NOTE: Should the assembly is incorrect or incomplete, 
the processor will not operate. 

3.  FOOD PROCESSOR USING 

•

Please make sure accessories are at their places before 
switching on. 

•

Plug-in device. 

•

Press and hold the Pulse button – food processor will 
operate while this button is pressed. 

•

To process liquid and hard ingredients together, use 
TURBO mode.

•

By rotating speed switch you may select food 
processing speed.

•

Do not remove any parts during operating.

•

CAUTION:  Do not operate continuously longer than 

1 minute with less than 2 minutes intermission.