Philips HR1720 - Инструкция по эксплуатации - Страница 10

E N G L I S H

1 0

7

Switch the appliance on and let it run until the ingredients are fine enough. This will take
approx. 10-30 seconds.

Disassembling the mill

1

Unplug the appliance.

2

If the mill is still attached to the motor unit, remove the mill from the motor unit by turning
it anticlockwise.

3

Place the mill upside down, unscrew the jar (anti-clockwise) and then remove the blade unit.

4

Always clean the removable parts immediately after use.

Cleaning

We advise you to clean the removable par ts immediately after use.

Always unplug the appliance before cleaning.

◗

Never clean the motor unit, the blade units, the filter and the sealing rings in the dishwasher.

◗

Always disassemble all removable parts before cleaning them. Do not forget to remove the
sealing rings from the blade units (blender and mill).

◗

Avoid touching the blades. The blades are very sharp.

The blender and mill jar (without blade unit), lid and measuring cup are dishwasher-proof.

Motor unit

◗

Clean the motor unit with a moist cloth. Do not rinse the motor unit under the tap. Do not
use abrasives, scourers, alcohol, etc.

Storage

You can store excess mains cord by winding it round the base of the motor unit.

Environment

◗

Do not throw the appliance away with the normal household waste at the end of its life, but
hand it in at an official collection point for recycling. By doing this you will help to preserve
the environment (fig. 13).

Guarantee & service

If you need information or if you have a problem, please visit the Philips Web site at

www.philips.com

or contact the Philips Customer Care Centre in your countr y (you will find its

phone number in the worldwide guarantee leaflet). If there is no Customer Care Centre in your
countr y, turn to your local Philips dealer or contact the Ser vice Depar tment of Philips Domestic
Appliances and Personal Care BV.