Philips HR1619 - Инструкция по эксплуатации - Страница 9

 7 

 Put the pusher in the feeding tube.

Note: The pusher prevents spillage.

 8 

 Press the on/off button or the turbo speed button to switch on the appliance.

 - When you use the on/off button, you can adjust the speed with the speed selector. The higher 

the speed, the shor ter the processing time required.

 - When you use the turbo speed button, the appliance operates at maximum speed. In this case, 

you cannot adjust the speed with the speed selector.

Note: If the ingredients stick to the wall of the bowl, release the button to switch off the appliance and 

loosen the ingredients with a spatula or add some liquid.
Note: Always let the appliance cool down after chopping meat with the blade unit.

 9 

 After processing, release the on/off button or the turbo speed button to switch off the 

appliance. Then wait until the blade unit has stopped rotating.

 10 

 Press the lid release button on the bowl (1) and turn the lid clockwise to remove it 

(2).  (Fig. 9)
tips

 - The appliance chops ver y quickly. If you use the turbo speed button, use it briefly to prevent the 

food from becoming too finely chopped.

 - Do not let the appliance operate too long when you chop (hard) cheese or 

chocolate. Otherwise these ingredients become too hot, star t to melt and turn lumpy.

 - Do not use the blade unit to chop ver y hard ingredients like coffee beans, turmeric, nutmeg and 

ice cubes, as this may cause the blade unit to get blunt.

Combination disc

The combination disc is intended for slicing and shredding vegetables like cucumber, carrots, 

potatoes, leek and onions and cer tain kinds of cheese. One side is intended for slicing and the other 

side for shredding. You can switch from slicing to shredding and the other way round by simply 

turning the disc. 

Never process hard ingredients like ice cubes with the combination disc.
The cutting edges of the combination disc are very sharp. Do not touch them.

 1 

 Place the tool holder in the bowl (Fig. 5).

 2 

 Place the combination disc on the tool holder with the slicing or shredding side facing up, 

depending on the result you want (Fig. 10).

 3 

 Put the lid on the bowl (1). Turn the lid anticlockwise (2) to fix it (‘click’) (Fig. 7).

 4 

 Put the ingredients in the feeding tube. 

 - Pre-cut large ingredients into chunks that fit in the feeding tube. 

 - Fill the feeding tube evenly for the best results. 

 - When you have to process a large amount of ingredients, process small batches and empty the 

bowl between batches.

 - To shred cheese, e.g. Parmesan, Gouda or Emmentaler, the cheese should be at refrigerator 

temperature. 

 5 

 Fasten the motor unit onto the lid of the bowl (‘click’) (Fig. 8).

 6 

 Press the on/off button or the turbo speed button to switch on the appliance.

 - When you use the on/off button, you can adjust the speed with the speed selector. The higher 

the speed, the shor ter the processing time required.

 - When you use the turbo speed button, the appliance operates at maximum speed. In this case, 

you cannot adjust the speed with the speed selector.

EnglisH

9