BRAYER BR1249 - Инструкция по эксплуатации - Страница 7

7

EN

ATTENTION!

When chopping hard vegetables, for example, car­
rots — cut the carrot into small 15x15x15 mm pieces 
and put them in the cup. The maximal weight of the 
carrot should not exceed 250 g. Add 350 ml of water.

ATTENTION!

Hold the motor unit (2) with the blender attachment 
(1) vertically while processing the food.

•  To switch the unit on, press and hold down the button 

(4) «I». Use this operation mode for mixing liquid 
products.

•  When you press and hold the button (4) «I» you can 

control the attachment rotation speed by turning 
the control knob (5). Use this operation mode for 
processing of liquid and solid products.

•  For operation at the maximal rotation speed, press 

and hold down the button (3) «II».

• 

Notes:

­ products should be put into the bowl before the 

unit is switched on. The amount of products to be 
processed should not exceed 2/3 of the capacity 
of the bowl in which they are processed.

­ before chopping and mixing peel the fruit, remove 

inedible parts, such as stones, and cut fruit into 
15x15x15 mm cubes. Put them into a bowl and 
add some juice or water. The maximal amount of 
products should not exceed 350 g and 250 ml of 
water or juice.

­ do not chop or mix frozen food.

• 

To switch the blender attachment (1) rotation off 

release the button (3 or 4).

• 

After you finish the unit operation, take the power 

plug out of the mains socket and remove the blender 
attachment (1), turning it clockwise.

• 

ATTENTION!

­ Do not remove the blender attachment (1) 

during the unit operation.

­ To avoid damaging the knives of the blender 

attachment (1) do not process very hard 

products, such as cereals, rice, coffee beans, 

hard cheese, frozen food etc.

­

If the foodstuffs are hard to chop with the 

blender attachment (1), add some water, juice, 
liquor etc.

CLEANING

• 

Unplug the unit after you finish using it. 

•  Wash only the lower part of the blender attachment 

(1), clean the outer surface with a slightly damp cloth. 
Never immerse the blender attachment (1) into water 
or any other liquids completely.

•  Wipe the motor unit (2) with a soft slightly damp cloth 

and then wipe them dry.

•  After processing salty or sour products, it is 

necessary to rinse the blender attachment (1) with 
water immediately.

•  While possessing products with dyeing properties 

(for instance, carrot or beetroot) the attachments and 
bowls can get colored, wipe the attachments and the