BRAYER BR1246 - Инструкция по эксплуатации - Страница 5

8

9

EN

EN

•  Insert the power plug into the mains socket.

•  Immerse the blender attachment (1) into the bowl 

with food that you want to chop/mix.

ATTENTION!

Hold the motor unit with the blender attachment (1) 

vertically while processing the food (pic.1).
•  To switch the unit on, press and hold down the button 

(4) «

». Use this operation mode for mixing liquid 

products.

•  When you press and hold the button (4) « » you 

can control the attachment rotation speed by turning 

the control knob (5). Use this operation mode for 

processing of liquid and solid products.

•  For operation at the maximal rotation speed, press 

and hold down the button (3) «T».

• 

Notes:

 - products should be put into the bowl before the 

unit is switched on. The amount of products to be 

processed should not exceed 2/3 of the capacity 

of the bowl in which they are processed.

 - before chopping and mixing peel the fruit, remove 

inedible parts, such as stones, and cut fruit into 

15x15x15 mm cubes. Put them into a bowl and 

add some juice or water. The maximal amount of 

products should not exceed 350 g and 250 ml of 

water or juice.

 - do not chop or mix frozen food.

•  Use the whisk attachment (7) only for beating egg 

whites, making biscuit dough or for mixing ready 

desserts.

Before installing the whisk attachment (7), make 

sure that the power plug is not inserted into the 

mains socket.

•  Insert the whisk attachment (7) into the whisk gear 

(6).

•  Insert the whisk gear (6) into the motor unit, make 

sure that the gear (6) and the whisk (7) are fixed 

properly (fig. 2).

•  Insert the power plug into the mains socket.

•  Immerse the whisk attachment (7) into a suitable 

bowl with food.

•  To switch the unit on, press and hold down the button 

(4) « ».

•  When you press and hold the button (4) « » you can 

control the attachment rotation speed 

•  by turning the control knob (5).

•  For operation at the maximal rotation speed, press 

and hold down the button (3) «T».

• 

Release the button (3 or 4) to switch off.

• 

After you finish using the unit, disconnect the power 

plug from the mains socket, disconnect the whisk 

gear (6) from the motor unit (pic. 3).

•  Remove the whisk attachment (7) from the gear (6).

POTATO MASH MAKING ATTACHMENT

Continuous operation time should not exceed 

1 minute while using the potato mash making 

attachment (8). Make at least a 3-minute break 

between operation cycles.

•  Before installing the attachment (8), make sure that 

the power plug is not inserted into the mains socket.

•  Insert the attachment (8) into the motor unit, and turn 

it counterclockwise as far as it will go, make sure that 

the attachment (8) is fixed properly (pic. 3).

•  Insert the power plug into the mains socket.

•  Immerse the attachment (8) into the bowl with boiled 

potatoes.

ATTENTION! 

When chopping hard vegetables, for 

example, car rots — cut the carrot into small 15x15x15 

mm pieces and put them in the suitable container. 

The maximal weight of the carrot should not exceed 

150g. Add 250 ml of water.

• 

To switch the blender attachment (1) rotation off 

release the button (3 or 4).

• 

After you finish the unit operation, take the power 

plug out of the mains socket and remove the blender 

attachment (1) by pressing the release buttons (2) 

(pic. 1).

ATTENTION!

 - Do not remove the blender attachment (1) during 

the unit operation.

 - To avoid damaging the knives of the blender 

attachment (1) do not process very hard products, 

such as cereals, rice, coffee beans, hard cheese, 

frozen food etc.

 -

If the foodstuffs are hard to chop with the blender 

attachment (1), add some water, juice, liquor etc.

USING THE WHISK ATTACHMENT

•  Continuous operation time should not exceed 1 

minute while using the whisk attachment (7). Make at 

least a 3-minute break between operation cycles.

ATTENTION! 

Do not use the whisk attachment (7) to 

knead tight dough (pic.1).

ATTENTION! 

When making the potato mash hold the 

motor unit with the attachment (8) vertically (pic. 3).

•  To switch the unit on, press and hold down the button 

(4) « ».

•  When you press and hold the button (4) « », you 

can control the attachment rotation speed by turning 

the control knob (5). 

•  For operation at the maximal rotation speed, press 

and hold down the button (3) «T».

•  When you make potato mash, add warm milk or 

some potato pot liquor.

• 

Release the button (3 or 4) to switch off.

• 

After you finish the unit operation, take the power 

plug out of the mains socket and remove the 

attachment (8).