BRAYER BR1243 - Инструкция по эксплуатации - Страница 5

8

9

en

en

Before installing the whisk attachment (7), make 

sure that the power plug is not inserted into the 

mains socket.

• 

Insert the whisk attachment (7) into the whisk gear 

(6).

• 

Insert the whisk gear (6) into the motor unit (2) and 

turn it counterclockwise, make sure that the gear (6) 

and the whisk (7) are fixed properly (fig. 3).

• 

Insert the power plug into the mains socket.

• 

Immerse the whisk attachment (7) into a suitable 

bowl with food. You can put the foodstuffs into the 

cup (8).

• 

To switch the unit on, press and hold down the button 

(4) .

• 

When you press and hold the button (4)  you can 

control the attachment rotation speed 

• 

by turning the control knob (5).

• 

For operation at the maximal rotation speed, press 

and hold down the button (3) «TURBO».

• 

Release the button (3 or 4) to switch off.

•  After you finish using the unit, disconnect the power 

plug from the mains socket, disconnect the whisk 

gear (6) from the motor unit (2) by turning the gear 

(6) clockwise.

• 

Remove the whisk attachment (7) from the gear (6).

CLeAnInG

•  Unplug the unit after you finish using it. 

• 

Wash the whisk attachment (7) and the cup (8) with 

warm water and a neutral detergent and dry them.

• 

Wash only the lower part of the blender attachment 

(1), clean the outer surface with a slightly damp cloth. 

never immerse the blender attachment (1) into water 

or any other liquids completely.

• 

Wipe the motor unit (2), the whisk attachment gear 

(6) with a soft slightly damp cloth and then wipe them 

dry.

• 

After processing salty or sour products, it is 

necessary to rinse the blender attachment (1) with 

water immediately.

• 

While possessing products with dyeing properties 

(for instance, carrot or beetroot) the attachments and 

bowls can get colored, wipe the attachments and the 

bowls with a cloth, dampened in vegetable oil; after 

that wash the attachments and bowls with a neutral 

detergent, rinse and dry them.

• 

do not immerse the motor unit (2), the gear (6) into 

any liquids, do not wash them under water jet or in a 

dishwashing machine.

• 

do not use abrasives and solvents to clean the motor 

unit body (2) and the removable parts.

STORAGe

• 

Clean the unit parts before taking it away for long 

storage.

• 

do not wind the power cord around the motor unit 

(2).

• 

keep the unit in a dry cool place out of reach of 

children and disabled persons.

DeLIVeRY SeT

1.  Motor unit — 1 pc.

2.  Blender attachment — 1 pc.

3.  Whisk gear — 1 pc.

4.  Whisk attachment — 1 pc.

5.  Geared lid — 1 pc.

6.  Instruction manual — 1 pc.

TeCHnICAL SPeCIFICATIOnS

• 

Power supply: 220­240 V, ~ 50­60 Hz

• 

Rated input power: 800 W

ReCYCLInG

To prevent possible damage to the 

environment or harm to the health of people 

by uncontrolled waste disposal, after 

expiration of the service life of the unit or the 

batteries (if included), do not discard them 

with usual household waste, but take the unit and the 

batteries to specialized stations for further recycling.

The waste generated during the disposal of the unit 

is subject to mandatory collection and consequent 

disposal in the prescribed manner.
For further information about recycling of this product 

apply to a local municipal administration, a disposal 

service or to the shop where you purchased this 

product.

The manufacturer reserves the right to change the 

appearance, design and specifications not affecting 

general operation principles of the unit, without prior 

notice.

The unit operating life is 3 years

The manufacturing date is specified in the serial 

number. In case of any malfunctions promptly apply 

to the authorized service center.