Braun MR330 Sauce - Инструкция по эксплуатации - Страница 7

8

English

Our products are engineered to meet the highest 
standards of quality, functionality and design. We hope 
you thoroughly enjoy your new Braun appliance. 

Caution
Please read the use instructions carefully and 
completely before using the appliance. 

•

The blades are very sharp! To avoid injuries, 

please handle blades with utmost care.

•

Always unplug the appliance when it is left un-
attended and before assembling, disassembling, 
cleaning and storing.

•

The appliance is not intended for use by children or 
persons with reduced physical, sensory or mental 
capabilities, unless they are supervised by a person 
responsible for their safety. Keep the appliance out of 
reach of children to ensure that they do not play with 
it.

•

Do not hold the motor part 

!

 nor the whisk gear box 

&

 under running water, nor immerse them in water. 

•

Braun electric appliances meet applicable safety 
standards. Repairs or the replacement of the mains 
cord must only be done by authorised service 
personnel. Faulty, unqualified repair work may cause 
considerable hazards to the user. 

•

Before plugging into a socket, check whether your 
voltage corresponds to the voltage indicated on the 
appliance.  

•

The appliance is constructed to process normal 
household quantities. 

•

Neither the beaker 

%

, nor the chopper bowl (c) is 

microwave-proof.

Description

!

Motor part

‚

On/off switch (speed 1)

#

On/off switch (speed 2)

$

Blender shaft

%

Measuring beaker 

&

Whisk gear box

Á

Whisk

Ë

Chopper («CA»)

How to operate your handblender

The handblender is perfectly suited for preparing dips, 
sauces, soups, mayonnaise and baby food as well as for 
mixing drinks and milk shakes. 
1.  Insert the motor part 

!

 into the blender shaft 

$

 until 

it locks into place.

2.  Position the handblender deep in the bowl, then press 

switch 

‚

 or 

#

.

3. After use, turn the blender shaft to remove it from the 

motor part. 

You can operate the handblender in the measuring 
beaker, or in any other container. When blending directly 
in the saucepan while cooking, remove the pan from the 
stove first to protect your handblender from overheating. 

How to operate your whisk

Use the whisk only for whipping cream, beating egg 
whites and mixing sponges and ready-mix desserts. 
1.  Insert the whisk 

Á

 into the whisk gear box 

&

, then 

insert the motor part 

!

 into the gear box until it locks 

into place. 

2.  Place the whisk deep in a bowl and only then, press 

switch 

‚

 (speed 1) to operate it.

3.  After use, first turn the whisk gear box to remove it 

from the motor part. Then pull the whisk out of the 
gear box. 

For best results

•

Do not use the beaker 

%

, but a wider bowl.

•

Only use switch 

‚

 (speed 1) to operate the whisk. 

•

Move the whisk clockwise holding it slightly inclined.

•

Only whip up to 400 ml chilled cream (min. 30 % fat 
content, 4-8 °C).

•

Only whip up to 4 egg whites.

How to operate your chopper 
attachment 

(a) Chopper gear box
(b) Blade
(c) Chopper bowl
(d) Anti-slip base/lid

The chopper is perfectly suited for chopping meat, 
cheese, onions, herbs, garlic, carrots, walnuts, 
hazelnuts, almonds etc. 
When chopping hard goods (e.g. hard cheese) use the 
on/off switch 

#

.

N.B.: Do not chop extremely hard food, such as ice 
cubes, nutmeg, coffee beans or grains. 

¥

Before chopping ... 

–

pre-cut meat, cheese, onions, garlic, carrots (see 
processing guide on page 5),

–

remove stems from herbs, shell nuts,

–

remove bones, tendons and gristle from meet. 

1.  Caution: Carefully remove the plastic cover from the 

blade (b). The blade is very sharp! Always hold it by 
the upper plastic part. Place the blade on the centre 
pin of the chopper bowl (c). Press it down until it locks 
into place.
Always place the chopper bowl on the anti-slip base 
(d). 

2.  Place the food in the chopper bowl. 
3.  Put the gear box (a) on the chopper bowl.  
4.  Insert the motor part 

!

 into the gear box (a) until it 

locks into place. 

5. Press switch 

‚

 or 

#

 to operate the chopper. During 

processing, hold the motor part with one hand and the 
chopper bowl with the other. 

6.  After use, turn the motor part 

!

 to remove it from the 

gear box. 

7.  Then remove the gear box.  
8.  Carefully take out the blade. 
9.  Remove the processed food from the chopper bowl. 

The anti-slip base also serves as a lid for the chopper 
bowl. 

99408356_MR330_P6-36  Seite 8  Dienstag, 15. Dezember 2009  11:22 11