Блендеры Saturn ST-FP0056 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
5
resistant, sanitary and easily cleaned.
Before first use and after every use,
separate container parts (items 1-6)
and clean thoroughly in warm, soapy
water, then rinse and dry well. DO NOT
WASH ANY PARTS IN AN AUTOMATIC
DISHWASHER. Periodically check all
parts before reassembly. If the pro-
cessing blades are stuck or difficult to
turn, DO NOT USE BLENDER. Check by
carefully turning the blades in a coun-
terclockwise direction (opposite edges
are sharp). Blades should turn freely.
If the glass container is chipped or
cracked, DO NOT USE BLENDER. Further
use could result in the container break-
ing during use.
Use only recommended replacement
parts available at an authorized service
station.
USE
OF
DAMAGED
OR
NON-
RECOMMENDED PARTS COULD RESULT
IN A SEVERE PERSONAL INJURY
AND/OR DAMAGE TO THE BLENDER.
See next page for proper container as-
sembly in user instructions.
NEVER IMMERSE THE MOTOR BASE IN
WATER. Unplug unit. The housing can
be cleaned with a damp cloth.
The motor is permanently lubricated
and does not require any additional lu-
brication.
ANY SERVICING SHOULD BE PER-
FORMED BY AN AUTHORIZED SERVICE
FACILITY.
KNOW YOUR BLENDER
CAUTION: Follow these important
steps to assemble, tighten, and
mount blender container quickly
and correctly. INJURY MAY RESULT
IF MOVING BLADES ARE ACCI-
DENTALLY EXPOSED.
ASSEMBLY OF CONTAINER
1. Turn container upside down so the
small opening is at the top.
2. Place sealing ring on container open-
ing.
3. Turn the agitator blades upside down
and place in mouth of container.
4. Thread container bottom to container.
Engage threads properly. Screw on firm-
ly.
5. Turn mill upside down, and remove
the blade base.
6. Place ingredients in. Make sure the
correct packing is placed properly.
