Profi Cook PC-UM 1207 inox - Инструкция по эксплуатации - Страница 39

PC-UM1207_IM 

21.02.20

39

Cleaning

  WARNING: 

• 

Always remove the plug before cleaning.

•  Under no circumstances should you immerse the appliance in 

water for cleaning purposes. Otherwise this might result in an 

electric shock or fire.

• 

The blades on the knife block are very sharp. A 

risk of injury 

exists!

  CAUTION:

•  Do not use a wire brush or any abrasive items.

•  Do not use any acidic or abrasive detergents.

• 

The individual parts are not dishwasher-safe.

  NOTE: Preliminary Cleaning

Half fill the mixing jar with water and turn the switch to 

“

MIN

” for approximately 10 seconds. Then pour out the 

liquid. 

For thorough cleaning, please remove the mixing jar.

Fitting and Detaching the Knife Block

1. 

Turn the mixing jar on its head.

2.  With a little effort turn the screw-cap counterclockwise 

and detach the knife block.

3. 

Take the knife block carefully out of the mixing jar.

4.  Remove the seal ring for cleaning.

5. 

After drying, place the seal ring back onto the knife block.

6.  Insert the knife block onto the thread on the bottom of 

the mixing jar.

7. 

Tighten the screw-cap of the knife block by turning it 

clockwise.

8.  Ensure that the knife block sits securely in position. 

  CAUTION:

Only operate the appliance if you have properly fitted the 

knife block with the seal ring! Otherwise the mixing jar will 

not be sealed.

Mixing Jar, Lid, Knife Block, Screw-Cap,  

Sealing Rings and Measuring Cup

Use a little dishwashing liquid and clean these components 

in warm rinsing water. Then dry everything before assem

-

bling the parts again.

Housing

Only a moderately moist cloth should be used for cleaning 

the outside of the appliance.

Storage

•  Clean the appliance as described. Let the accessories 

dry completely.

•  We recommend that you keep the appliance in the 

original packaging, if you do not want to use it for a 

longer period.

• 

Always store the appliance out of reach of children in a 

well ventilated, dry place.

Troubleshooting

Problem

Possible Cause

Solution

The appliance 

is not working.

The appliance is not connected to mains power.

Check the mains connection.

The appliance is fitted with a 

safety switch

.

This prevents the motor from starting up unin

-

tentionally.

Check that the mixing jar is firmly in place.

The overheating protection has been activated. 

The motor is too hot.

1.  Immediately turn the switch to the position 

OFF

. 

Disconnect the mains plug from the wall socket.

2.  Let the appliance cool down for at least 15 min-

utes before switching it on again.