Profi Cook PC-UM 1207 inox - Инструкция по эксплуатации - Страница 37

PC-UM1207_IM 

21.02.20

37

•  Objects like spoons or scrapers never may be in the mixing jar 

during operation.

Designated Use

This appliance is used for:

•  Mixing of liquids

• 

Chopping firm foodstuffs

•  Crushing ice

• 

Producing of flours

It is intended for the use in private households and similar 

applications.
It is imperative that short-time operation is observed.

It is only to be used as instructed in this user manual. The 

appliance is not intended for commercial use.

Any other use shall be considered as not intended use and 

can lead to material damage or even personal injury.

The manufacturer shall not be liable for damages caused by 

not intended use.

Unpacking the Appliance

1.  Remove the packaging of the appliance.

2. 

Remove all packaging material such as plastic film, filler 

material, cable ties and box packaging. 

3.  Check that all parts are in the box.

4.  If the packaging content should be incomplete or if dam-

ages should be noticeable, do not operate the appliance. 

Return it to the distributor immediately.

  NOTE:

Dust or production residues may still be found on the 

appliance. We recommend that you clean the appliance 

as described under “Cleaning”.

Overview of the Components /  

Scope of Delivery

1  Refill opening cap / measuring cup 

2  Mixing jar lid with refill opening

3  Mixing jar

4  Knife block

5  Sealing ring for the knife block

6 Screw-cap

7  Base section with motor

8  Rotary knob and button

Not Shown

Sealing ring for the lid

Installation

Mixing Jar

Place the mixing jar onto the motor housing. Note the sym-

bols on the mixing jar and the motor housing.

  NOTE:

The mixing jar fits onto the motor housing in various 

positions. The safety switch is only shut when the two 

triangles are aligned with one another.

Lid

1.  Make sure that the sealing ring is attached to the lid.

2. 

Place the lid on the mixing jar so that the flap on the 

cover is located to the left of the spout opening.

3. 

Press the lid firmly onto the mixing jar. It must seal the 

mixing jar completely.

4. 

Turn the cover clockwise until it stops. The cover flap is 

now directly over the spout opening. Check to ensure the 

cover is shut tight.

5. 

Insert the cap into the refill opening of the lid. Pay 

attention to the guide lugs on the screw-cap. Turn the 

screw-cap clockwise as far as it will go. The clasp must 

snap into place.

  NOTE:

The refill opening cap can also be used as a measuring 

cup.

Notes for Use

  CAUTION:

The glass may crack if the temperature is too high! Do 

not

 fill with liquids above 60 °C.

• 

Place the appliance on a firm and flat surface. Position it 

is such that it cannot tip over.

•  Only switch on the appliance if the mixing jar is closed 

with the lid. The refill opening in the lid must also be 

closed.

• 

Do not overfill the mixing jar! You can fill it to a maximum 

of 1.75 litres. Use the scale on the jug.

•  Froth requires a large capacity. Reduce quantities of 

liquids which produce a lot of froth.

•  Keep one hand on the lid if you are crushing ice or if 

there is a large quantity of ingredients.

•  Cut the food to be mixed into small pieces beforehand.

Electric Connection

1.  Set the rotary knob to the 

OFF

 position.

2.  Before inserting the power plug into the outlet, check 

that the mains voltage to be used matches that of the