Sven SPS-710 - Инструкция по эксплуатации - Страница 23

ENG

Operation Manual

SPS-710

23

h

 SLEEP: Sleep mode

i

 FM/BT:

FM/Bluetooth mode

j

 TR +/-: treble control button 

k

 BASS +/-: bass control button

l

 VOL +/-: volume control button

m

, 

: previous track/next track (Player and Bluetooth 

mode);

previous/next station (Radio mode); clock/alarm settings

n

, AUTO: Play / Pause (Player and Bluetooth mode);

Start/Stop auto scan (pressed long in Radio mode);

clock/alarm settings

o

 0-9: numeric pad (select track number in the Player 

mode or track number FM Radio)

Notes:

• Use the remote control at an angle no more than 

30 degrees, no more than 7 meters away from the IR 

receiver.

• Direct the RC at the IR receiver display on the 

control panel. 

• If the RC isn’t working, check batteries and replace 

the discharged batteries with new ones.

• Remove the batteries from the remote control if 

the device is left unused for a long period of time 

(more than a week).

5. PREPARATION AND OPERATION

Speaker placement

• 

Place the speakers symmetrically to the listener at least 

one meter away.

• 

Place  the  speaker  system  far  away  from  supersensitive 

monitors  and  TV  sets,  as  insignificant  image  distortion  in 

these devices is possible.

MSS сonnecting and control

SPS-710  Multimedia  Speaker  System  can  be  connected 

to virtually any audio source: laptop/

mobile device, 

Fig. 3. Remote control

PC sound card, etc. (see connection diagram in Fig. 4).

• 

Before making any connections, make sure that the MSS is unplugged. Connect the active speaker 

with the passive one using the audio cable (included). To do this, wring out the connector terminals 

on a passive speaker, insert the red cable wires of speakers to the red terminals and the black cable 

wires  of  speakers  –  to  the  black  terminals  (see  connection  diagram  in  Fig.  4),  and  then  connect 

cables to the active speaker terminals 

k

. 

Note. Check the reliable fixation of wires in terminals, connection compliance with polarity 

and  the  absence  of  contact  of  bared  wires  with  each  other  and  the  metal  parts  of  the 

hardware.

• 

To connect the MSS to a PC, MP3 player, first plug the RCA jacks of the 2RCA to mini-jack Ø 3,5 mm 

signal cable (included) to the РС audio AUX input of the active speaker, then plug the mini-jack of the