Акустика Sven MS-2080 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
ENG
25
MS-2080
Operation Manual
6. OPERATION MODES
Player Mode
•
The system will enter the Player mode automatically when a carrier (USB flash or SD/MMC
card)* is connected to corresponding ports
g
or
h
, or press button
b
on the front panel of the
subwoofer or USB/SD button
t
on the remote control. The LED display
a
will show the selected
mode, then the number of the tracks found and a sequence number of the track played and then
the playback time elapsed. The playback will start automatically.
•
To select a track, you can directly enter its number on the remote control using the numeric pad
buttons
g
or select it using buttons
e
and
f
on the front panel of the subwoofer. The display
a
will show the track number for a short time and then the playback time elapsed.
•
You can select the playback mode using REPEAT button
h
on the remote control (ONE – the
•
playing track replay; RND – playback random tracks; ALL – playback all tracks available).
Bluetooth mode
•
In order to transmit signal in this mode it is necessary by first to connect the device with a signal
source (see Fig. 6). For this purpose select the Bluetooth mode using button
b
on the front panel
of the subwoofer or BT button
s
on the remote control. After 2-3 seconds the speaker system will
enter the search mode, BLU mode is shown on the display
a
«bt».
•
It is necessary to select the search mode of devices with Bluetooth on a signal source (telephone,
notebook, smartphone, etc.) «MS-2080», message will be displayed on the screen which it should
be connected with**.
•
The «bt» indicator lights continuously when connection is successful. If there is no any
connection, the lighting of the «bt» indicator is intermittent. In this case the system should be
switch over to the search mode once again (to turn off and turn on anew)***.
•
It is possible to control the player of a signal source from the remote control or using the button
on the front panel of the subwoofer when connecting to a signal source.
•
To force disconnect from BT signal source - press and hold the buttons AUTO
c
on the front
panel of the subwoofer or button
s
on the remote control.
FM Mode
•
Use button
b
on the front panel of the subwoofer or FM button
b
on the remote control to enter
the FM mode. The display
a
will current adjustment frequency.
•
Press long AUTO button
d
on the front panel of the subwoofer or AUTO button
n
on the remote
control short to auto scan and memorize the found stations.
•
The second pressing of this button before the scanning is over will stop the auto scanning
process. The display
a
shows the frequency being scanned, when a radio station is being
memorized, the display shows its assigned sequence number for a short moment.
* The operation may be incorrect if a SD card of 512 Mb capacity or lower is used. If a USB flash
device of 8 Gb capacity or more is used, command processing time may be extended.
** You might have to enter “0000” code to connect some models of devices via Bluetooth.
*** If an item has been already registered in the device list of a source, then the second search
mode activation is not obligatory. Choose only the item name and the “connect” command on the
source.
