Акустика Sven MS-2000 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
•
To select the track, you can enter its number on the remote control using the numeric pad but-
tons
j
or select it using buttons
c
and
f
on the front panel. The display will show the track
number for a short moment, and then the playback time elapsed.
•
You can select a playback mode using the remote control REPEAT
k
button («ONE» – repeat the
playing track; «RND» – play random tracks; «ALL» – play all tracks available).
•
In the Player mode, Equalizer feature is available. To select a preset mode, use the EQ
l
button
on the remote control.
* The MSS operation may be incorrect if an SD card of 512 Mb capacity or lower is used. If a USB
fl
ash device of 8 Gb capacity or more is used, command processing time may be extended.
Tuner Mode
•
To switch to the Tuner mode, use the INPUT
b
button on the front panel or the FM
m
button on
the remote control. The subwoofer display
a
will show the FM inscription.
•
To auto scan and memorize the found stations, press button
e
on the front panel or the AUTO
c
button on the remote control short. To stop auto scanning, press this button again before the
scanning is over. The display
d
will show the frequency being scanned. When the channel is being
memorized, the display shows its number for a short moment.
•
For manual scanning, use buttons TUNE-/+
d
on the remote control (up/down the frequency
range). To save the selected station, press the SAVE
r
button on the remote control and then,
using buttons
c
and
f
on the front panel or buttons
e
and
t
on the remote control, assign the
station its number and press the SAVE button again. When the station has been memorized, the
display
a
will write “Good”.
•
If preset stations are available in the memory, you can switch from one to another by short pressing
buttons
c
,
f
on the front panel or buttons
e
,
t
on the remote control. You can also enter the
frequency or the number of the preset station with the remote control numeric pad buttons. The
display will show the station number for a short moment and then its frequency.
The radio will tune to the set frequency within 2-3 seconds.
AUX/PC Mode
•
To switch to the AUX/PC mode, press the INPUT
b
button on the front panel or buttons
q
PC/
o
AUX on the remote control, the MSS switched on. The display
a
will show AUX or PC.
Clock Mode
•
When the MSS is in the ST-BY mode, the display
a
shows the current time. When the system is in
a di
ff
erent mode, to see the time, use the CLOCK
x
button on the remote control. The current time
will show for 3-5 seconds.
•
To set the current time, go to the ST-BY mode by pressing button
e
on the front panel or button
n
on the remote control long. To enter the time setting mode, press the SET
v
button on the remote
control (the corresponding position will start blinking on the display
a
). Set the minutes and hours
directly from the RC numeric pad or using buttons
c
,
f
on the front panel or
e
,
t
on the RC. To
switch between setting hours/minutes and to exit the setting mode, press the RC SET
v
button
short.
ST-BY Mode
•
To enter/exit this mode, press and hold down button
e
on the front panel or button
n
on the RC.
When the MSS is in the ST-BY mode, the display
a
shows the current time.
MUTE Mode
•
To enter the MUTE mode, press button
p
on the remote control. To exit the MUTE mode, press
this button again.
ENG
27
Operation Manual
MS-2000
