Акустика Sven MS-1000 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Problem
MSS does not
turn on.
No sound.
There is too quiet
sound of speakers.
Distortion of sound.
Sound is produced by
one of the channels
only.
Cause
MSS is not connected to the mains
outlet.
Power switch is o
Ԛ
.
Volume level is set at minimum value.
Improperly connected audio source.
Volume level is set at minimum value.
Large amplitude of the input signal.
Improperly connected speakers to
audio source.
Solution
Check the connection.
Turn on the switch.
Adjust volume control knob.
Connect audio sources correctly.
Adjust volume control knob.
Turn down source volume
and MSS volume.
Check the connection of speakers.
If none of the above mentioned solutions solves the problem, please refer to nearest authorized
service center for consultation by a quali
ԛ
ed specialist. Never try to repair the device on your own.
•
Adjust subwoofer volume level and tremble control by turning BASS
b
and TREBLE
c
control
knobs accordingly. While turning the knob clockwise, volume level increases, but while turning it
counterclockwise, it reduces.
Notes:
• If speaker system has not been used for a long time, please mind to switch off POWER
a
on subwoofer rear panel and pull out its plug
h
from the socket.
• To improve sound quality, use Line-Out output of sound card.
6. TROUBLESHOOTING
ENG
19
Operation Manual
MS-1000
