Zigmund Shtain K 219.91 B - Инструкция по эксплуатации - Страница 14

Section 2

Kullanım bilgileri

Kullanım bilgileri

Kullanım bilgileri

Kullanım bilgileri

Kullanım bilgileri

Ku

llan

ım

bilg

iler

i

Ku

llan

ım

bilg

iler

i

Ku

llan

ım

bilg

iler

i

Ku

llan

ım

bilg

iler

i

2.2. TOUCH CONTROL 05 USING INFORMATION

M.On/Off Button:

 It is using for opening and the motor. At the 

beginning motor starts with second speed.

V - (minus) Button: 

It is using to decrease the motor speed until first 

speed.
 

V + (plus) Button: 

It is using to increase the motor speed until the 

highest speed. BOOST mode  starts if you press again while the motor highest 
speed. Motor run 3 minutes highest speed after one level decrease and  run 3 
minutes  until to second speed and BOOST mode completed . Display flashed 
speed number and “b” while BOOST mode. When you entered BOOST mode, 
canceled shutdown timer set.
 

Timer Button:

 When the motor is working if the timer button is pushed 

speed number that shows the time will start flash. After 15 minutes motor and 
lamp will turn off. If the timer button is pushed again it’s flashing over and timer 
is canceled. When you entered Timer mode, it’s canceled  BOOST mode.

Lamp Button:

 It is using for turning on and turning off the lamp.

Filter Warning: 

There is a two kind of WARNING for filter. After engine reaches 30

hours, warning of filled grease filter (F) will be indicated on screen and it 
reaches 300 hours, warning of filled carbon filter (C) will be indicated on screen
If both filter is filled it will be showed as filled grease filter on screen warning. 
Time of filter can be reseted when the engine turn off and filter is filled. For 
reseting the greased filter V- button should be used. For reseting the carbon 
filter, V+ button should be used. After pushing the V+ button (F) or (C) will be 
appeared on screen. After pushing 5 second (E) will be appeared. It means that 
carbon filter time reseted.

OPERATION INFORMATION

14