Teka DVT 950 - Инструкция по эксплуатации - Страница 12

GB 

Changing light bulbs

Proceed as follows:
•Unscrew the lamp cover.
•Change the broken / burnt out lamp. 
•Screw the lamp cover back in.

Cleaning the metal filters

During cleaning and maintenance work, 

make sure the safety instructions are 

complied with.

Instructions for use

You  can  activate  or  deactivate  the  cooker 

hood by operating the functions shown in the 

diagram.
Switch on the extractor fan a few minutes before 

you start to cook in order to ensure that a steady 

air flow has been established before fumes 

appear.
Allow the extractor fan to run for several minutes 

after you have finished cooking (between 3 to 5 

minutes) in order to expel all the grease from the 

outlet duct. This prevents the return of grease, 

smoke and smells.

Program the working time

1)Switch on the cooker hood and choose the 

required aspiration speed. 

2)Push ‘Timer’.
3)Select the required programming time from 1 

to 99 minutes by using the buttons ‘+’ and ‘-’.

4)The display will alternately show the clock and 

the remaining programming time.The maximum 

speed  ‘H’  can  only  be  selected  manually  and 

will be changed automatically to the second 

speed level after approximately 10 minutes.

Increase fan speed
Reduce fan speed

Display 

Light
Timer

Filter saturation indicator “F”

•When the sign ‘Saturation of the filters’ is on, the 

filters should be cleaned.

•After  cleaning  the  filters,  simultaneously  push 

“+” and “-” for at least 3 seconds whereupon the 

sign will be switched off.

Cleaning the hood body

•To  remove  the  filters  from  their  fittings,  press 

lightly on the locks and then pull them off.

•The  metal  filters  can  be  cleaned  by  soaking 

them in hot water with neutral detergent until the 

fat dissolves and then rinsing them under the tap 

or using special anti-grease products. They can 

also be washed in a dishwasher. In this case, it 

is advisable to stack them vertically to avoid food 

residues to stick to them.

•Cleaning  in  a  dishwasher  may  damage  the 

metallic surface (blackening it), although this will 

not affect its fat retention capacity.

•Once  clean,  leave  them  to  dry  off  and  then  fit 

them onto the kitchen hood.

Cleaning and maintenance

•If  your  kitchen  hood  is  made  of  stainless  steel, 

use proprietary cleaners mentioned in the 

product instructions.

•If  your  kitchen  hood  is  painted,  use  lukewarm 

water and a neutral soap. 

•Never  use  metallic  scourers,  nor  abrasive  or 

corrosive products.

•Dry the kitchen hood using a cloth that does not 

produce fibres.

•Do not use vapour cleaners