Teka DPS 90 - Инструкция по эксплуатации - Страница 12

Adjustment of the clock

•  To remove the filters from their fittings, press 

lightly on the locks and then pull them off.

•  The metal filters can be cleaned by soaking 

them  in  hot  water  with  neutral  detergent 

until the fat dissolves and then rinsing them 

under  the  tap  or  using  special  anti-grease 

products.  They  can  also  be  washed  in  a 

dishwasher.  In  this  case,  it  is  advisable  to 

stack them vertically to avoid food residues 

to stick to them.

•  Cleaning  in  a  dishwasher  may  damage  the 

metallic  surface  (blackening  it),  although 

this will not affect its fat retention capacity.

•  Once  clean,  leave  them  to  dry  off  and  then 

fit them onto the kitchen hood.

•  If  your  kitchen  hood  is  made  of  stainless  steel, 

use proprietary cleaners mentioned in the 
product instructions.

•  If  your  kitchen  hood  is  painted,  use  lukewarm 

water and a neutral soap. 

•  Never  use  metallic  scourers,  nor  abrasive  or 

corrosive products.

•  Dry the kitchen hood using a cloth that does not 

produce fibres.

•  Do not use vapour cleaners.

During cleaning and maintenance work, make 

sure the safety instructions are complied with.

Cleaning the hood body

Cleaning and maintenance

1) Push the on/off’ button for 3 seconds.
2) Adjust the hour digits by pressing ‘+’ or ‘-’.
3) Push the on/off’ button again.
4) Adjust the minute digits by pressing ‘+’ or ‘-’.
5) After 3 seconds your settings are saved 

automatically.

Cleaning the metal filters

Changing light bulbs

Proceed as follows:

•  Unscrew the lamp cover.
•  Change the broken / burnt out lamp. 
•  Screw the lamp cover back in.

GB