Neff I91T58N0 - Инструкция по эксплуатации - Страница 7

7

Saturation indicator:

U b

When the activated carbon filter reaches
saturation point, an acoustic signal is 
sounded for 6 seconds after the fan has
switched off, and a 

J b

appears in the 

display. The activated carbon filter should
be replaced straight away.

Removing the filter:

Warning: 

The halogen bulbs must be 

switched off and cool.

1.

Remove the metal filters.

2.

Press the catches at both sides of the 
filter inwards and lift the carbon filter
down and out.

Filters and maintenance

3.

Engage the catches at both sides.

4.

Insert the metal grease filters (see
"Removing and inserting the metal 
grease filters").

5. Cancel the 

J

in the display. 

❑

Press the 

J

button.

3.

Insert the metal grease filters.

Replacing the activated carbon filter:

❑

During normal operation (1 to 2 hours
per day) the activated carbon filters
should be replaced approximately 1 x
year.

❑

A replacement filter can be obtained
from any authorized dealer (see optional 
accessories).

❑

Use original filters only.

By doing so you will obtain maximum
performance from your extractor hood.

Disposing of the old activated carbon 
filter:

❑

There are no pollutants in the activated
carbon filters. They can therefore be 
disposed of as part of your normal
domestic refuse.

Activated carbon filter:

For neutralizing odours in recirculating
mode.

Caution:

As the filter becomes more and more 
saturated with grease, there is an increased
risk of fire and the function of the extractor
hood may be impaired.

Important:

Change the activated carbon filter promptly
to prevent the risk of fire from the 
accumulation of heat when deep-fat frying
or roasting.

Inserting the filter:

Warning: 

The halogen bulbs must be 

switched off and cool.

1.

Remove the metal-mesh filters
(see "Removing and inserting the metal-
mesh grease filters").

2.

Insert the activated carbon filter.