Neff D79F58N0 - Инструкция по эксплуатации - Страница 9

9

Operation

Light

Fan On/Off

Switch back fan

Display fan settings

Fan run-on

Switch on and increase fan
Intensive setting

Grease filter saturation display

NOTE:

It is recommended to switch on the

blower when you start cooking and not to
switch it off again until several minutes after you
have finished cooking. In this way the kitchen
fumes are removed most effectively.

Switching on the fan and 
selecting the fan settings

Press button

-

.

Press button 

+

. The fan setting is increased

by one.

Press button 

–

. The fan setting is reduced by

one.

Switching off the fan

Press button

-

.

Intensive setting

The Intensive setting

ç

generates maximum

performance. It can be used if thick fumes or
strong odours occur temporarily.

Keep pressing button 

+

until 

ç

is displayed.

If the Intensive setting is not switched off

by hand, the fan automatically switches back
to setting 2 after 10 minutes.

Fan run-on

Press button 

r

.    

The fan runs for 10 minutes at the selected

setting. The  

r  

symbol is lit on the display.

Then the fan switches off automatically.

Light

The light can be switched on and off

independently of the fan.

To adjust the luminosity, hold down

button

0

until the required luminosity is

obtained.

Saturation displays

When the grease filters or the activated

carbon filter are saturated, a signal sounds for
6 seconds after the fan is switched off.
Display 

J

or 

ã

J

is lit. 

Exhaust-air mode:

J

Circulating-air mode:

ã

J

The grease filters should now be cleaned or
the activated carbon filter changed.

To cancel the display, press button 

-

.

Switching the acoustic signal off and on

When a button is pressed, an

acknowledgement signal sounds.

To switch off the acoustic signal,

simultaneously press buttons 

-

and

+

for

approx. 3 seconds. An acknowledgement signal
sounds.

To switch on the acoustic signal, repeat the

process.