Neff D76M35N0 - Инструкция по эксплуатации - Страница 12

12

Changing the bulbs

Changing the filament bulbs

1.

Lift the bulb cover slightly.

2.

Push the bulb cover towards the middle of
the appliance.

3.

Replace the defective bulb with a new one
of the same type and equivalent power (see
rating plate).

4.

Reinsert the bulb cover.

5.

Restore the power supply by inserting the
mains plug or switching on the fuse.

NOTE:

If the light does not function, check

whether the bulbs have been inserted
correctly.

Defective bulbs should be replaced

immediately to avoid overloading the
remaining bulbs.

Before changing the bulbs, always follow

the instructions and warnings in the chapter
entitled ”Safety instructions”!

The description of changing the bulbs

applies to several appliance models.

NOTE: 

Observe the warranty regulations in the

enclosed service booklet.

Changing the halogen bulbs

Halogen bulbs become very hot during
operation. Even some time after the appliance
has been switched off, there is still a risk of
burns!

Before changing the halogen bulbs, ensure

that they have cooled down fully.

1.

Carefully remove the bulb ring with a
suitable tool.

2.

Replace the defective bulb with a new one

of the same type and equivalent power (see
rating plate).

NOTE:

When inserting halogen bulbs, do not

touch the glass tube. Therefore use a clean
cloth when inserting the bulb.

3.

Reinsert the bulb cover.

4.

Restore the power supply by inserting the
mains plug or switching on the fuse.

1

2