MONSHER TOWN 60 B - Инструкция по эксплуатации - Страница 7

7

English

1. To install the air cleaner above the stove, draw a vertical line on the wall 

from the center of the stove vertically to the ceiling. To comply with safety 
regulations, the distance between the cooking surface and the air cleaner should 
be 700 mm. Accordingly, make a mark with a pencil on the vertical line at a height 
of 700+426=1126 mm from the surface of the stove. Draw a horizontal line through 
this point on the wall. Measure 100 mm on this line to the right and left from the 
point of intersection of the vertical and horizontal lines and make marks with a 
pencil. Using a 6-mm drill bit, drill holes in these marks. Insert dowels in the holes 
just drilled and fi x the hooks.

2. Installation of decorative cover Draw a horizontal line on a wall, at a distance 

of 75 mm from the ceiling. Measure 50 mm on this line to the right and left from the 
point of intersection with the vertical line and make marks with a pencil. On these 
marks, drill the holes, insert the 8-mm dowels in them and tighten 2.5-mm screws 
which must protrude 2 mm from the wall.

Step 1: Installation of hooks
Step 2: Installation of mounting bracket
Step 3: Installation of housing
Step 4: Installation of external part of decorative cover
Step 5: Installation of internal part of decorative cover
1- Ø8 dowel
2- Mounting bracket
3- Hook
4- Internal part of decorative cover
5- External part of decorative cover
6- Air cleaner housing
7- Bushing adapter
8- Ø 2.5 screw