Monsher Texno 60 B - Инструкция по эксплуатации - Страница 12

12

English

;

If possible, disconnect and move freestanding or slide-in range from cabinet 
opening to provide easier access to rear wall/ceiling. Otherwise put a thick, 
protective covering over countertop, cooktop or range to protect from damage 
and debris. Select a flat surface for assembling the unit. Cover that surface with 
a protective covering and place all canopy hood parts and hardware in it.

;

In addition check whether near the installation area of the hood (in the area 
accessible also with the hood mounted) an electric socket is available and it 
is possible to connect a fumes discharge device to the outside (only suction 
version).

;

Carry out all the masonry work necessary (e.g. installation of an electric socket 
and/or a hole for the passage of the discharge tube).

Expansion wall plugs are provided to secure the hood to most types of walls/

ceilings. However, a qualified technician must verify suitability of the materials in 
accordance with the type of wall/ceiling. The wall/ceiling must be strong enough 
to take the weight of the hood. Do not tile, grout or silicone this appliance to the 
wall. Surface mounting only.

OPERATION

Use the high suction speed in cases of concentrated kitchen vapours. It is 

recommended that the cooker hood suction is switched on for 5 minutes prior 
to cooking and to leave in operation during cooking and for another 15 minutes 
approximately after terminating cooking.

To select the functions of the hood, simply touch the controls.

1.

Stand by/ON display

2.

ON/OFF suction speed (power) 1
ON/OFF suction speed (power) 2
ON/OFF suction speed (power) 3

3.

ON/OFF lights