Вытяжки Monsher Inlight 55 XE - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Русский
14
English
8. Do not use the appliance without
the aluminum filter in place.
9. Do not touch the lamps.
10. Do not remove the aluminum filter
while the appliance is in operation.
11. Do not disconnect the appliance
from the power supply system directly.
If necessary, turn the appliance off us-
ing the control panel and, only after that,
unplug it from the power supply system.
When switching on: first connect the ap-
pliance to the power supply system, then
switch it on using the control panel, but
not vice versa!
12. The appliance requires regular
cleaning and maintenance work.
13. When installing the appliance, ob-
serve the required distance between it
and the cooking surface of your stove:
- for an electric stove: at least 65 cm
- for a gas or gas-electric stove: at
least 75 cm (pic.1)
14. Do not allow children to play with
packaging materials, it can be dangerous!
15. The appliance is allowed to be
turned on only once the pots and/or pans
are placed on the stove.
16. For best air cleaning in your kitch-
en, do not turn off the appliance imme-
diately after the cooking process is com-
pleted: let the appliance run for a further
15 minutes. For this purpose you can also
use the timer function (the button «Auto
Switch Off Timer» on the control panel).
17. Ensure adequate ventilation in the
kitchen, if a gas stove is operated simul-
taneously with the appliance.
18. In case of any malfunctions, con-
tact your nearest authorized service cen-
ter.
19. If the kitchen hood is supposed to
operate in air discharge mode, then dur-
ing installation it is important to provide
a duct of the corresponding diameter. To
prevent loss of performance caused by
aerodynamic resistance of the duct, the
air duct must not be too long, or curved.
Never restrict the duct size, or make sharp
bends. In addition, it is preferable to use
smooth PVC duct (round or flat), rather
than the flexible corrugated one because
bends of a corrugated duct increase the
noise level of the hood.
20. The manufacturer does not bear
any responsibility for any possible dam-
age, in case of non-compliance with above
precautions.
