Monsher IHOOD 60 Noir Verre (76423) - Инструкция по эксплуатации - Страница 19

English

19

If necessary, clean the outside of the air cleaner with a soft, damp cloth. Do not use 

any abrasive cleaning agents. For painted stainless steel surfaces: to avoid scratching it is 
recommended to wipe them with a soft, damp cloth in the painting direction. Do not remove the 
lamp cover during the surface cleaning process.

Replacing lamps
Before replacing lamps, remove the hood’s power 

cable. Lift the front glass up and remove the aluminum 
cartridge filter.

Then:

B

Disconnect the socket and lamp connector by 

pulling back on the plastic tab as shown in the figure on 
the left to open the locking device.

B

Hold the lamp by the body and turn the 2 

fixing tabs on the lamp clockwise or counterclockwise 
to fit into the gaps on the lighting panel. After the fixing 
tabs line up with the gaps, hold the lamp by the body and 
remove it.

Caution!  Do not use the steam generators for cleaning.
Caution! Not following the above rules for cleaning the appliance and replacing filters may 

cause fire. 

Caution! If you need to transport the air cleaner, first of all, disconnect it from the power 

supply and proceed with disassembly. It is recommended that you transport it in the original 
packaging. If this packaging is not available, package the appliance using materials that 
prevent possible damage resulting from transportation.