Kuppersberg Slimlux S 90 GW - Инструкция по эксплуатации - Страница 8

8

ENGLISH

Cooker hood

TECHNICAL PASSPORT

Switch on a cooker hood:

- press on any of the speed control 

knobs (1, 2, 3) and pull out the pull-out 
panel;

- turn on lighting if necessary (button 

with bulb symbol), lighting works as 
with a closed and open pull-out panel.

Switch off a cooker hood:

  - press the speed control knob (1, 

2, 3) on the sensor, depending on the 
speed at which the cooker hood (1-
1, 2-2, 3-3) works or slide the pull-out 
panel.

The switching the hood on and 

off with the touch switch is double-
pressing, that is, pressing the speed 
1 – the cooker hood is switched on, 
press speed 1 again – the cooker hood 
is turned off. The panel is pulled out – 
a cooker hood is turned on, pushed in 
the initial position – a cooker hood is 
switched off.

Launch timer:

To start the timer, press one of the 

touch buttons (1, 2, 3) and hold it for 5 
seconds.

The timer will automatically switch 

off the cooker hood in 5 minutes. 

8. INSTRUCTIONS TO CARE THE 

COOKER HOOD

ATTENTION!

BEFORE CLEANING THE COOKER 

HOOD, DISCONNECT IT FROM THE 
ELECTRIC MAINS.

8.1

 For external cleaning of 

stainless steel cooker hoods, use special 

means in accordance with the relevant 

instructions.

8.2

 Never use abrasive detergents 

and means that contain soda, acid, 

chlorides or solvents, coarse sponges to 

clean the cooker hoods.

8.3

 By washing avoid moisture 

entering the current-carrying parts of 

the cooker hood, and especially into the 

electronic control unit; after washing, 

wipe the surface with a soft cloth.

8.4

 For cleaning glass surfaces, 

conventional glass cleaning means are 

suitable.

8.5

  The  aluminum  filter,  holding  oil 

and dust from the air, is clogged and 

should be washed after being soaked 

in hot water with an effective detergent 

once every 1.5 to 2 months. Changing 

the color of the filter after washing does 

not affect the quality of its work.

8.6

 To remove the aluminium 

filter  (Fig.  6),  press  the  spring  lock  of 

the  aluminium  filter  1  and  remove  it. 

Extract  the  pull-out  panel  with  filter 

2  and  remove  the  aluminium  filter  3. 

The  filter  installation  is  performed  in 

reverse  order.  Do  not  install  the  filter 

after washing until it is completely dry.

8.7

 To replace the lamp, it is necessary 

to remove aluminium filter 1, pull out the 

panel with the filter 2, pull the holder of 

the bulb socket, so that the lamp 3 came 

out of the body of cooker hood, holding 

the bulb socket, lightly press the lamp 

in the direction of the bulb socket and, 

turning it counterclockwise, take out