Kuppersberg Slimlux S 90 GW - Инструкция по эксплуатации - Страница 7

7

ENGLISH

Cooker hood

TECHNICAL PASSPORT

a  carbon  smoke  filter  (is  purchased 

separately).

6.9

 Check the reliability of the cooker 

hood mounting, feed and connect the 

cord to the mains through socket.

In  order  to  provide  additional 

protection  against  voltage  fluctuations 

in the network, it is recommended 

to  connect  the  extractor  hood  via  an 

additional automatic circuit breaker 6A.

7. INSTRUCTIONS FOR USE OF THE 

COOKER HOOD

7.1

 The cooker hood with a touch 

switch has 3 speeds of ventilation. 

Depending on the amount of 

evaporation during cooking, you can 

choose a low, medium or high of 

ventilation level.

7.2

 Before cooking, turn on the 

hood in the required operating mode. 

It is recommended to continue work of 

the cooker hood for 3-5 minutes after 

cooking, thus the air in the kitchen 

will be cleared from the residue of the 

vapours.

7.3

 On the decorative glass of your 

cooker hood there is a touch switch 

for operating modes of the engine and 

lighting lamps (Fig. 5):

  – on/off lighting

1 speed (low speed) – press the 

switch to position “1”

2 speed (average speed) – press the 

switch to position “2” 

3 speeds (high speed) – press the 

switch to position “3”

The touch switch with the symbol of 

the light bulb, intended to turn on the 

lamp at insufficient illumination of the 

working area of the cooker, is located 

on the left side of body of the cooker 

hood.

Fig. 4

Fig. 5

Fig. 4.1