Kuppersberg INTRO 60 X - Инструкция по эксплуатации - Страница 17

17

ENGLISH

TECHNICAL PASSPORT

Extractor hood

S E CT I O N  3.

Cleaning and maintenance

Caution! Before you start cleaning 

the appliance, disconnect it from the 

power supply.

Aluminum filter

Aluminum  filter  is  designed  to  trap 

grease  particles  out  of  the  flow  of  air 
running  through  it.  For  this  reason, 
the  filter  needs  regular  cleaning.  The 

cleaning interval depends on the 
frequency of use of the air cleaner. 

Generally, it is recommended to clean it 

once a month.

To  do  this,  remove  the  filters,  wash 

them in water with a neutral liquid 

detergent, dry them, then set them back 
in the air cleaner. Over time, filters may 

change color due to a regular washing. 

This is a natural process, which does not 
indicate  a  defect,  so  filter  replacement 

is not required.

The aluminum filters can be washed 

in the dishwasher.

How to remove aluminum 

filters:

1. Press on the latch of the filter lock.
2.  Pulling  down  a  bit,  remove  the

filter.

In  order  to  put  the  filters  in  place 

after  cleaning,  follow  the  above 

instructions in reverse order.

Carbon filter (used in 

recirculated air mode)

Carbon  filter  is  designed  to  trap 

odors and fumes while cooking. It is used 

in  cases  where  there  is  no  possibility 

to connect the air cleaner to a special 
ventilation duct for discharging air 
outward. When operating the appliance 

with a carbon filter, contaminated air is 

sucked into the appliance and passes 

through a carbon filter, and then clean 

air is supplied to the kitchen.

The carbon filter should be replaced 

at regular intervals. The interval of 

filter  replacement  depends  on  the 
frequency  of  use  of  the  air  cleaner, 

style of cooking and frequency of the 

aluminum  filter  cleaning.  Generally,  it 
is recommended to replace the carbon 
filter once every 4 months.

How to remove carbon filter:

1. Remove aluminum filters.
2. Turn  the  carbon  filter  to  the  left

and pull it.

3. Replace the old carbon filter with

the new one.

4. Put the filter back into place.

If necessary, clean the outside of the 

air cleaner with a soft, damp cloth. Do 
not  use  any  abrasive  cleaning  agents. 

For painted stainless steel surfaces: to 
avoid scratching it is recommended to