Kuppersberg F 690 - Инструкция по эксплуатации - Страница 21

21

ENGLISH

TECHNICAL PASSPORT

Extractor hood

S E CT I O N  5.

Cleaning and maintenance

Caution! Before you start cleaning 

the appliance, disconnect it from the 

power supply.

Aluminum filter

Aluminum  filter  is  designed  to  trap 

grease  particles  out  of  the  flow  of  air 

running through it. For this reason, 

the  filter  needs  regular  cleaning.  The 

cleaning interval depends on the 

frequency  of  use  of  the  air  cleaner. 

Generally, it is recommended to clean it 

once a month.

To  do  this,  remove  the  filters,  wash 

them in water with a neutral liquid 

detergent, dry them, then set them back 

in the air cleaner. Over time, filters may 

change color due to a regular washing. 

This is a natural process, which does not 

indicate  a  defect,  so  filter  replacement 

is not required.

The aluminum filters can be washed 

in the dishwasher.

How to remove aluminum 

filters:

1. Press on the latch of the filter lock.

2. Pulling down a bit, remove the 

filter.

In  order  to  put  the  filters  in  place 

after cleaning, follow the above 

instructions in reverse order.

Carbon filter (used in 

recirculated air mode)

Carbon  filter  is  designed  to  trap 

odors and fumes while cooking. It is used 

in  cases  where  there  is  no  possibility 

to connect the air cleaner to a special 

ventilation duct for discharging air 

outward. When operating the appliance 

with a carbon filter, contaminated air is 

sucked into the appliance and passes 

through  a  carbon  filter,  and  then  clean 

air is supplied to the kitchen.

The carbon filter should be replaced 

at regular intervals. The interval of filter 

replacement depends on the frequency 

of use of the air cleaner, style of cooking 

and  frequency  of  the  aluminum  filter 

cleaning.  Generally,  it  is  recommended 

to  replace  the  carbon  filter  once  every 

4 months.

How to remove carbon filter:

1. Remove aluminum filters.

2.  Turn  the  carbon  filter  to  the  left 

and pull it.

3. Replace the old carbon filter with 

the new one.

4. Put the filter back into place.

If necessary, clean the outside of the 

air cleaner with a soft, damp cloth. Do 

not  use  any  abrasive  cleaning  agents. 

For painted stainless steel surfaces: to 

avoid scratching it is recommended to 

wipe them with a soft, damp cloth in the 

painting direction. Do not remove the 

lamp cover during the surface cleaning 

process.

Caution!

Do not use the steam generators for 

cleaning.

Caution!

Not following the above rules for 

cleaning the appliance and replacing 

filters may cause fire.