Kuppersberg F 660 - Инструкция по эксплуатации - Страница 8

8

TEchnical passporT

English

Extractor hood

S E CT I O N  5.

Cleaning and maintenance

Caution! Before you start cleaning 

the appliance, disconnect it from the 

power supply.

Aluminum fi lter

Aluminum  fi lter  is  designed  to  trap 

grease  particles  out  of  the  fl ow  of  air 

running through it. For this reason, 

the  fi lter  needs  regular  cleaning.  The 

cleaning interval depends on the 

frequency of use of the air cleaner. 

Generally, it is recommended to clean it 

once a month.

To  do  this,  remove  the  fi lters,  wash 

them in water with a neutral liquid 

detergent, dry them, then set them back 

in the air cleaner. Over time, fi lters may 

change color due to a regular washing. 

This is a natural process, which does not 

indicate  a  defect,  so  fi lter  replacement 

is not required.

The aluminum fi lters can be washed 

in the dishwasher.

How to remove aluminum 

fi lters:

1. Press on the latch of the fi lter lock.

2. Pulling down a bit, remove the 

fi lter.

In  order  to  put  the  fi lters  in  place 

after cleaning, follow the above 

instructions in reverse order.

Carbon fi lter (used in 

recirculated air mode)

Carbon  fi lter  is  designed  to  trap 

odors and fumes while cooking. It is used 

in cases where there is no possibility 

to connect the air cleaner to a special 

ventilation duct for discharging air 

outward. When operating the appliance 

with a carbon fi lter, contaminated air is 

sucked into the appliance and passes 

through  a  carbon  fi lter,  and  then  clean 

air is supplied to the kitchen.

The carbon fi lter should be replaced 

at regular intervals. The interval of fi lter 

replacement depends on the frequency 

of use of the air cleaner, style of cooking 

and  frequency  of  the  aluminum  fi lter 

cleaning. Generally, it is recommended 

to  replace  the  carbon  fi lter  once  every 

4 months.

How to remove carbon fi lter:

1. Remove aluminum fi lters.

2.  Turn  the  carbon  fi lter  to  the  left 

and pull it.

3. Replace the old carbon fi lter with 

the new one.

4. Put the fi lter back into place.

If necessary, clean the outside of the 

air cleaner with a soft, damp cloth. Do 

not use any abrasive cleaning agents. 

For painted stainless steel surfaces: to 

avoid scratching it is recommended to 

wipe them with a soft, damp cloth in the 

painting direction. Do not remove the 

lamp cover during the surface cleaning 

process.

Caution!

Do not use the steam generators for 

cleaning.

Caution!

Not following the above rules for 

cleaning the appliance and replacing 

fi lters may cause fi re.