Kuppersberg F 651 - Инструкция по эксплуатации - Страница 3

3

English

TEchnical passporT

Extractor hood

D E A R  C U S TO M E R,

Thank you for purchasing our 

equipment! We are sure that appliances 

of the KUPPERSBERG brand, which are 

modern, functional and made of high 

quality materials and components, will 

be a reliable assistant in your kitchen.

Please read this manual carefully 

before starting any installation work. It 

will help you avoid premature failure, as 

well as extend the life of your appliance 

to the maximum possible.

Please note that the installation 

of this appliance must be carried 

out  by  a  qualifi ed  technician  and  in 

accordance with these instructions. 

The manufacturer is not liable for any 

consequences of failure to observe this 

condition.

Caution!

The manufacturer reserves the right 

to make any changes, without prior 

notice, to design, outside appearance 

and scope of supply of appliance, which 

will be considered as necessary and 

useful according to the manufacturer’s 

point  of  view.  Possible  modifi cations 

will not affect the basic properties, 

including those that relate to safe 

operation of the appliance.

S E CT I O N  1.
S A F E TY  P R E CA U T I O N S

1. Assembling and electrical 

connection of the appliance must be 

carried out by skilled technicians of 

authorized service center.

2. The appliance is designed to 

operate on 220-240 V AC. Make sure 

that the technical parameters of your 

home power supply system correspond 

to the data for the power supply. If 

parameter values are above or below 

the  specifi ed  range,  the  use  of  the 

appliance is prohibited.

3. Do not connect the kitchen air 

cleaner to the ventilation channels that 

are used to remove smoke and fumes 

from the equipment operating on any 

other energy sources except electric 

one.

4. The appliance is to be connected 

only to an earthed power supply system.

5.  Do  not  cook  fl ammable  foods 

below the kitchen air cleaner.

6.  Use  aluminum  fi lter  that  comes 

with the appliance. The use of other 

materials is prohibited!

7. Do not connect the appliance 

to the power supply system, until 

the assembly and installation of the 

appliance is completed.

8. Do not use the appliance without 

the aluminum fi lter in place.

9. Do not touch the lamps.

10. Do not remove the aluminum 

fi lter while the appliance is in operation.

11. Do not disconnect the appliance 

from the power supply system directly. 

If necessary, turn the appliance off using 

the control panel and, only after that, 

unplug it from the power supply system. 

When  switching  on:  fi rst  connect  the 

appliance to the power supply system, 

then switch it on using the control 

panel, but not vice versa!