Kuppersberg DRM 600 - Инструкция по эксплуатации - Страница 3

3

ENGLISH

TECHNICAL PASSPORT

Extractor hood

D E A R   C U S T O M E R ,

Thank you for purchasing 

our equipment! We are sure that 
appliances of the KUPPERSBERG 
brand, which are modern, functional 
and made of high quality materials 
and components, will be a reliable 
assistant in your kitchen.

Please read this manual carefully 

before starting any installation work. 
It will help you avoid premature 
failure, as well as extend the life 
of your appliance to the maximum 
possible.

Please note that the installation 

of this appliance must be carried 
out  by  a  qualifi ed  technician  and  in 
accordance with these instructions. 
The manufacturer is not liable for any 
consequences of failure to observe 
this condition.

Caution!

The manufacturer is not responsible 

for any possible errors or misprints 
in this manual. The manufacturer 
reserves the right to make any changes, 
without prior notice, to design, outside 
appearance and scope of supply of 
appliance, which will be considered as 
necessary and useful according to the 

S E C T I O N   1.
S A F E TY  P R E C A U T I O N S

1. Assembling and electrical 

connection of the appliance must be 
carried out by skilled technicians of 
authorized service center.

2. The appliance is to be connected 

only to an earthed power supply 
system.

3.  Do  not  cook  fl ammable  foods 

below the kitchen air cleaner.

4.  Use  aluminum  fi lter  that  comes 

with the appliance. The use of other 
materials is prohibited!

5. Do not connect the appliance 

to the power supply system, until 
the assembly and installation of the 
appliance is completed.

6. Do not use the appliance without 

the aluminum fi lter in place.

7. Do not touch the lamps.
8. Do not remove the aluminum 

fi lter  while  the  appliance  is  in 
operation.

9. Do not disconnect the appliance 

from the power supply system directly. 
If necessary, turn the appliance off 
using the control panel and, only after 
that, unplug it from the power supply 

manufacturer’s point of view. Possible 
modifi cations will not affect the basic 
properties, including those that relate 
to safe operation of the appliance.