Hansa OKC 655 TH - Инструкция по эксплуатации - Страница 105

105

OPERATION AND MAINTENANCE

Use control panel to control your cooker hood (Fig. 4)

-  “-” and “+” touch sensors control cooker hood fan speed in the range from 1 to 4,

-  “+” touch sensor increases cooker hood fan speed

-  “-” touch sensor reduces cooker hood fan speed

-  Timer touch sensor activates fan timer (max 90 min.)

-  Lights “L” touch sensor switches cooker hood lights on/off independently of fan operation. Press for 

a short time to switch on/off lights.

Program function (Timer)

-   This cooker hood has a timer function, which controls fan operation. It can be programmed to auto

-

matically switch off the fan after 10 to 90 minutes in 10 minutes intervals.

-   In order to activate the timer function set the cooker hood fan at a required speed by pressing the 

“+” touch sensor and then touch the timer (clock) touch sensor. The display will show a flashing 0 

to indicate that timer setup mode is activated. Now select the delay time to switch off the cooker 

hood fan by touching ‘’+‘’, keeping in mind that the number displayed musts be multiplied by the 10 

minute interval (For example 1=10 min, 2=20 min,3=30 min, and so on)

-   Once the required delay time is set, confirm it by touching the timer (clock) symbol again. The dis

-

play will stop flashing and indicate current fan speed. A small flashing dot by the value correspond

-

ing to fan speed indicates that timer is counting down. To cancel the fan timer function, touch the 

timer (clock) sensor while the countdown timer is running.

Note: The timer function must be activated within 20 seconds. If no action is taken the cooker hood will 

switch to normal operation mode. Electronics protected with a 250V-1.6 A fuse / quick acting (5x20 glass 

fuse-element).