GRUNDIG GDSP5460BC Black - Инструкция по эксплуатации - Страница 14

14 ENGLISH

INSTALLATION OF APPLIANCE _______________________

Installation of the Hood to the  

Chimney 

Make the electrical connection of your 

hood before starting the installation of 

the  chimney. Slip the  Chimney plates 

around the body. Screw the  Chimney to 

the  Chimney fastening plates available on 

the motor cabin. (Figure 12).

Install the  Chimney to the  Chimney fas-

tening plate that is secured to the wall 

from its upper outer edges (Figure 12). 

(Fig. 12)

While using with the carbon filter, air baffle is 

provided with your appliance with the aim of 

re-releasing the air which is cleaned with car-

bon filter from the perforated located on the  

chimney.  Assemble the air baffle as below. 

(Fig. 13)

Installation of Air Baffle

There is a tab in the middle of the  chimney 

connection plate. Place the middle point of 

this tab on the line that is drawn perpendic-

ular to the wall. Align horizontally and mark 

the holes where the connection plate will be 

mounted via a pen (Figure 13 / A, B).

Drill the marked points with Ø6mm drill and 

insert two Ø6mm plastic dowels in the drilled 

holes (Figure 13 / A, B).

Fix the  Chimney connection plate to the wall 

with 3.9x22 screws (Figure 13/ A, B).

For the assembly air baffle, drill points C, D, 

E, F with a Ø6mm drill bit and tap the Ø6mm 

plastic dowels (Figure 13).

Assemble cooker hood's body (Page 14 / Fig-

ure 9).