Вытяжки Faber STRIP SMART PB BK A90 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
6
4. CONTROLS
$
%
&
'
(
Button Function
Led
A
Turns the motor on/off at speed one.
On/Off.
This button is always lit when the
Hood is in operation.
Press and hold the button for approximately 2 seconds, with all the
loads turned off (Motor and Lights) to perform a Reset if the Filter
Alarm is Activated.
Flashes 3 times.
With the motor turned off:
Saturation of the grease filters takes place after 100 hours of continuous
operation of the hood.
Flashes once a second.
With the motor turned off:
Saturation of the activated charcoal filters takes place after 200 hours
of continuous operation of the hood.
Flashes once every 0.5 seconds.
B
Turns the Motor on at speed two.
On/Off.
Press and hold the button for approximately 2 seconds, with all the
loads turned off (Motor+Lights), to turn the Activated Charcoal Filter
alarm on. The relevant LED
(A)
flashes twice to confirm.
To turn the alarm off, press the button again and hold for at least 2
seconds. The relevant LED
(A)
flashes once.
C
Turns the Motor on at speed three.
On/Off.
Press and hold the button for approximately 2 seconds, with all the
loads turned off (Motor and Lights), to turn the Remote control On/Off.
1 flash of LED
(A)
- Remote
control Off.
2 flashes of LED
(A)
- Remote
control On.
D
Turns the motor on at speed
INTENSIVE 1
.
This speed is timed to run for 10 minutes. At the end of this time,
the system returns automatically to the speed that was set before. If
it is activated with the motor turned off, the hood will switch to OFF
at the end of the time.
To turn it off, press button
(D)
or button
(A)
again.
Flashes every second.
Press and hold for approximately 2 seconds to turn the motor on at
speed
INTENSIVE 2
.
This speed is timed to run for 6 minutes. At the end of this time, the
system returns automatically to the speed that was set before. If it
is activated with the motor turned off, the hood will switch to OFF
at the end of the time.
To turn it off, press button
(D)
approximately 2 seconds or button
(A)
..
Flashes every half second.
E
Turns the lights ON/OFF at maximum strength.
On/Off.
Press and hold for approximately 2 seconds turns the secondary
light ON/OFF.
On/Off.
5. LIGHTING
• For replacement contact technical support
(“To purchase contact technical support”).
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
