Вытяжки Faber SOFT CUBE - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

5
2. USE
• The extractor hood has been designed
exclusively for domestic use to eliminate
kitchen smells.
• Never use the hood for purposes other
than for which it has been designed.
•
Never leave high naked flames under
the hood when it is in operation.
•
Adjust the flame intensity to direct it
onto the bottom of the pan only, making
sure that it does not engulf the sides.
• Deep fat fryers must be continuously
monitored during use: overheated oil
can burst into flames.
3. CARE AND CLEANING
-
The Activated charcoal filter is not
washable and cannot be regenerated,
and must be replaced approximately
every 4 months of operation, or
more frequently for particularly heavy
usage
(W)
.
-
The Grease filters must be cleaned
every 2 months of operation, or more
frequently for particularly heavy usage,
and can be washed in a dishwasher
(Z)
.
=
• Clean the hood using a damp cloth and
a neutral liquid detergent.
4. CONTROLS
Button Function
Led
L
Turns the lights ON/OFF
at maximum intensity.
-
P r e s s a n d h o l d t h e
button for approximately
4 seconds, with all the
loads turned off (Motor
and Lights), to turn the
Activated Charcoal Filter
alarm on/off.
LED
S1
flashes
twice = alarm
ON.
LED
S1
flashes
once = alarm
OFF.
T1
Turns the motor on/off at
speed one.
-
P r e s s a n d h o l d t h e
button for approximately
2 seconds, with all the
loads turned off (Motor
and Lights), to reset the
Activated Charcoal Filter
alarm.
LED
S1
turns
OFF (Fixed or
Flashing).
S1
S i g n a l s t h e M e t a l
Grease Filter saturation
alarm, indicating that it
is necessary to wash
the filters. The alarm is
triggered after the Hood
has been in operation for
100 working hours.
Fixed.
When this is activated,
it signals the Activated
Charcoal Filter saturation
alarm, indicating that the
filter must be changed;
the Metal Grease Filters
must also be washed. The
Activated Charcoal Filter
saturation alarm comes
into operation after the
Hood has been working
for 200 hours.
Flashing.
5. REMOTE CONTROL
The remote control is powered by a CR2032
type 3 V battery (not included).
• Do not place the remote control near
heat sources.
• Do not discard the batteries with normal
waste, they must be put into the specific
containers.
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)