Faber IN-NOVA PREMIUM X A90 - Инструкция по эксплуатации - Страница 5

5

Controls

Button Function

Led

L

Turns the lights on/off at maximum strength.

-

T1

Turns the motor on/off at speed one.

Fixed.

Keeping the button pressed for approximately 2 seconds starts/stops the temperature 

sensor.

1  flash  of  LEDs 

T2

and 

T3

 algorithm 

activated.

2  flashes  of  LEDs 

T2

 and 

T3 

algorithm 

deactivated.

T2

Turns the Motor on at speed two.

Press and hold the button for approximately 5 seconds, with all the loads 

turned off (Motor and Lights), to turn the Activated Charcoal Filter alarm on. The 

relevant  LED  flashes  twice  to  confirm.

To turn the alarm off, press the button again and hold for at least 5 seconds. 

The  relevant  LED  flashes  once.

Fixed.

T3

Turns the Motor on at speed three.

Press and hold the button for approximately 3 seconds, with all the loads turned 

off (Motor and Lights), to perform a reset. The LED 

S1

  flashes  three  times.

Fixed.

T4

Turns the Motor on at 

INTENSIVE

 Speed.

This speed is timed to run for 6 minutes. At the end of this time, the system 

returns automatically to the speed that was set before. If it is activated with the 

motor turned off, the hood will switch to OFF at the end of the time.

Press and hold for 5 seconds to enable the remote control, indicated by the 

LED  flashing  twice.

Press and hold for 5 seconds to disable the remote control, indicated by the 

LED  flashing  just  once.

Fixed.

S1

Signals the Metal Grease Filter saturation alarm, indicating that it is necessary 

to  wash  the  filters.  The  alarm  is  triggered  after  the  Hood  has  been  in  operation 

for 100 working hours.

Fixed.

When this is activated, it signals the Activated Charcoal Filter saturation alarm, 

indicating  that  the  filter  must  be  changed;  the  Metal  Grease  Filters  must  also 

be washed. The Activated Charcoal Filter saturation alarm comes into operation 

after the Hood has been working for 200 hours.

Flashing.

WARNING: 

the temperature sensor is active when the hood is started. If, when the hood is off, the tempe-

rature detected by the sensor exceeds the set limit, the hood will turn on at speed two. When the tempe-

rature detected by the sensor returns below the threshold value the hood will turn off. In the event of the 

temperature not returning below the threshold value for approximately 90 minutes, the hood will turn off (the 

sensor is disabled for approximately 15 minutes, after which it will return to the previous setting). If the hood 

is adjusted manually (switching on/changing speed) the sensor is disabled and the hood must be turned off.

After turning the hood off, the sensor is disabled for approximately 15 minutes, after which it will return to 

the previous setting. The temperature sensor does not guarantee automatic start-up of the hood, as its 

operation  is  influenced  by  environmental  conditions,  types  of  cooking  operation,  height  and  installation  of 

the hood (tested at 530 mm).

WARNING:

 the sensor does not work with induction cookers.