Faber GREXIA GRES LG/X A90 - Инструкция по эксплуатации - Страница 6

Вытяжки Faber GREXIA GRES LG/X A90 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 128
Загружаем инструкцию
background image

6

4. CONTROLS

A

B

C

D

E

Button Function

Led

A

Turns the motor on/off at speed one.

Fixed.

With the motor turned off:

Saturation  of  the  grease  filters  takes  place  after  100  hours  of  continuous 

operation of the hood.

Flashes once a 

second.

With the motor turned off:

Saturation  of  the  activated  charcoal  filters  takes  place  after  200  hours  of 

continuous operation of the hood.

Flashes once

every 0.5 

seconds.

B

Turns the motor on at speed two.

On.

Press and hold the button for approximately 2 seconds, with all the loads 

turned off (Motor+Lights), to turn the Activated Charcoal Filter alarm on. LED 

(A)

  flashes  twice  to  confirm.

To turn the alarm off, press the button again and hold for at least 2 seconds. 

The  relevant  LED  flashes  once 

(A)

.

Flashing.

C

Turns the Motor on at speed three.

On.

Press and hold the button for approximately 2 seconds, with all the loads 

turned off (Motor+Lights), to reset the Filter saturation alarm. LED 

A

 flashes 

three times.

Flashing.

D

Turns the motor on at 

INTENSIVE

 speed.

This speed is timed to run for 6 minutes. At the end of this time, the system 

returns automatically to the speed that was set before. If it is activated with 

the motor turned off, it will switch to OFF at the end of the time. To deactivate 

it, press button 

D

 once more or press button 

A

.

Flashing.

With all the loads turned off (Motor+Lights), press and hold 

D

 for approximately 

2 seconds to enable the remote control. Button 

A

  flashes    twice.

With all the loads turned off (Motor+Lights), press and hold 

D

 for approximately 

2 seconds to disable the remote control. Button 

A

  flashes    once.

Flashing.

E

Turns the lights on/off at maximum strength.

On.

5. LIGHTING

•  For replacement contact technical support 

(“To purchase contact technical support”).

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к Faber GREXIA GRES LG/X A90?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"