Вытяжки Faber GLOW WH - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

5
2. USE
• The extractor hood has been designed
exclusively for domestic use to eliminate
kitchen smells.
• Never use the hood for purposes other
than for which it has been designed.
•
Never leave high naked flames under
the hood when it is in operation.
•
Adjust the flame intensity to direct it onto
the bottom of the pan only, making sure
that it does not engulf the sides.
• Deep fat fryers must be continuously
monitored during use: overheated oil
can burst into flames.
3. CARE AND CLEANING
-
The Activated charcoal filter is not
washable and cannot be regenerated,
and must be replaced approximately
every 4 months of operation, or
more frequently for particularly heavy
usage
(W)
.
W
-
The Grease filters must be cleaned
every 2 months of operation, or more
frequently for particularly heavy usage,
and can be washed in a dishwasher
(Z)
.
=
• Clean the hood using a damp cloth and
a neutral liquid detergent.
4. CONTROLS
A
B
C
D
E
Button Function
Led
A
Turns the motor on/off at
speed 1.
On.
B
Turns the Motor on at
speed 2.
B
+
A
On.
C
Turns the Motor on at
speed 3.
C
+
A
On.
D
Turns the Motor on at
speed 4.
D
+
A
On.
Press and hold the button
for approximately 2 seconds
to turn the motor on at
INTENSIVE
speed.
This speed is timed to run
for 6 minutes. At the end of
this time, the system returns
automatically to the speed
that was set before.
If it is activated with the
motor turned off, it will switch
to Off at the end of the time .
Press and hold button
D
or
button
A
for approximately
2 seconds to deactivate the
function.
Flashing.
E
Turns the lights On/Off at
maximum strength.
On.
Press and hold the button
for about 2 seconds to turn
the light on / off secondary.
On.
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)