Вытяжки Faber BEAT WH MATT F45 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

5
where you purchased the
product.
2. USE
• The extractor hood has been designed
exclusively for domestic use to eliminate
kitchen smells.
• Never use the hood for purposes other
than for which it has been designed.
•
Never leave high naked flames under
the hood when it is in operation.
•
Adjust the flame intensity to direct it onto
the bottom of the pan only, making sure
that it does not engulf the sides.
• Deep fat fryers must be continuously
monitored during use: overheated oil
can burst into flames.
3. CARE AND CLEANING
-
The Activated charcoal filter is not wash
-
able and cannot be regenerated, and
must be replaced approximately every 4
months of operation, or more frequently
for particularly heavy usage
(W)
.
-
The Grease filters must be cleaned
every 2 months of operation, or more
frequently for particularly heavy usage,
and can be washed in a dishwasher
(Z)
.
=
• Clean the hood using a damp cloth and
a neutral liquid detergent.
4. CONTROLS
T1
T2
T3
L
Button Functions
Led
T1
Speed
Turns the Motor on at Speed one. On
Turns the Motor off.
-
T2
Speed
Turns the Motor on at Speed two. On
T3
Speed
When pressed briefly, turns the
Motor on at Speed three.
Fixed
Pressed for 2 Seconds.
Activates Speed four with a timer
set to 6 minutes, after which it
returns to the speed that was
set previously. Suitable to deal
with maximum levels of cooking
fumes.
Flashing
L
Light
Turns the Lighting System on
and off.
-
Warning:
Button
T1
turns the motor off, after first
passing to speed one.
5. LIGHTING
• Lamps in risk group 1 under
IEC/EN62471 at a distance of
20cm and in exempt from risk
group under IEC/EN62471 at
a distance of 30cm.
• For replacement contact technical support
(“To purchase contact technical support”).
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)