Elica SPOT PLUS IX/A/90 - Инструкция по эксплуатации - Страница 16

16 

Operation 

Use the high suction speed in cases of concentrated kitchen 
vapours.  It is recommended that the cooker hood suction is 
switched on for 5 minutes prior to cooking and to leave in 
operation during cooking and for another 15 minutes 
approximately after terminating cooking.  
  
  

1 = ON/OFF – Speed increase 
2 = Lights ON/OFF 
3 = Selection of the desired function 
4 = Setting the function in use

 
5 = The display shows: 
a –

 list of available functions  

b –

 indicator of the function currently in use 

c –

 indicator of the speed in use 

d –

 clock / data related to the function in use 

e –

 saturation of the anti-grease filter 

f –

  saturation of the carbon anti-odour filter 

Available functions

SPEED  
Switch on/Speed increase: 

- press button 

1

 to switch on the hood  

- press button 

1

 to go to the next speeds, until the hood is 

switched off 
  
The extraction speed is shown on the display (c), in the 
following manner: 
 

1st speed   

performance 

40%  *** 

2nd speed 

performance 

60%  *** 

3rd speed 

performance 

80%  *** 

high speed   

performance 

100%  *** 

OFF 

*** the percentage displayed refers to the indicative value of the 

performance 

 
The high speed is timed for 10 minutes; to interrupt the timing 
and switch off the hood press button 

1

. 

NB= 

the speed might increase automatically during use, this is 

because the control is fitted with a system that protects the 
display in case of overtemperatures. 

 
CLOCK   
To set the clock: 

- press button 

3

 until moving the indicator(b) on function 

“CLOCK” 
- press button 

4

 to access clock setting 

- keep button 

4 pressed: 

•

keeping it pressed for one second increases the time by 

one minute 

•

after 10 seconds, each second it is pressed increases the 

time by 10 minutes 

To store the set time:

- press button 

3 

 
 
TIMER  
Stopwatch Function

- press button 

3

 until moving the indicator(b) on the “TIMER” 

function 
- press button 

4

 to access timer setting 

- 

to start the stopwatch:

 simultaneously press button 

3

 and 

button 

4

, for 5 seconds 

- 

to stop the stopwatch:

 simultaneously press button 

3

 and 

button 

4

, for 5 seconds 

Note=

 after 60 minutes the stopwatch stops automatically 

 
“Countdown” Function 

- press button 

3

 until moving the indicator(b) on the “TIMER” 

function 
- press button 

4

 to access timer setting 

To set the “Countdown” timer: 

- keep button 

4 pressed: 

•

keeping it pressed for one second increases the timer by 

one minute 

•

after 10 seconds, each second it is pressed increases the 

timer by 5 minutes 

To save the “Countdown” timer 

- press button 

3 

The Timer indicator(b) will start flashing to indicate the 
start of the “Countdown” 
When the “Countdown” reaches “0:00” the motor is 
switched off 
Note =

 to set a new timer, button 

4

 must be pressed until the 

indication “0:00” is displayed again 

Note =

 the maximum countdown setting time is 60 minutes