Elica LANE BL MAT/A/52 - Инструкция по эксплуатации - Страница 16

16 

ALCOHOL! 

Panel 

Fig. 2-3-8-9 

Maintenance of the panel

Disassembly: 

a. 

pull the panel (FRONT SIDE) downwards energetically 

b.

 unhook it from the back hinges. 

Cleaning:

the suction panel must be cleaned as frequently as the grease 

filter, use a dampened cloth with neutral liquid detergents.  

Avoid using products containing abrasives. DO NOT USE 

ALCOHOL! 

Assembly:

The panel must be hooked in the back and fixed in the front 

(with magnets).  

Attention! 

always check that the panel is tightly fixed to its 

place. 

Grease filter 

Fig. 2-9 
Traps cooking grease particles. 

The grease filter

 must be cleaned once a month using non 

aggressive detergents, either by hand or in the dishwasher, 
which must be set to a low temperature and a short cycle.  
When washed in a dishwasher, the grease filter may discolor 
slightly, but this does not affect its filtering capacity. 
To remove the grease filter, pull the spring release handle. 

Charcoal filter (filter version only) 
Fig.7

It absorbs unpleasant odors caused by cooking. 

The saturation of the 

charcoal filter

 occurs after more or less 

prolonged use, depending on the type of cooking and the 
regularity of cleaning of the grease filter. 
In any case it is necessary to replace the cartridge at least 
every four months. 
The charcoal filter may NOT be washed or regenerated. 

Circular charcoal filter 

Apply one on each side as cover to both the shield grids of the 
motor impeller, then turn clockwise. 
For the disassembly, turn counter-clockwise. 

Replacing lamps 

The hood is equipped with a lighting system based on LED 
technology. 
The LEDs guarantee an optimum lighting, a duration up to 10 
times longer than the traditional lamps and allow to save 90% 
electrical energy. 
 
For replacement, contact the technical service.