Electrolux EFG50250S - Инструкция по эксплуатации - Страница 4

www.electrolux.com

4

1.

 SAFETY INSTRUCTIONS

Caution!

 Closely follow the instructions 

set out in this manual. All responsibility,  
for any eventual inconveniences, 
damages or fires caused by not 
complying with the instructions in this 
manual, is declined. The extractor hood 
has been designed exclusively for 
domestic use.

Warning!

 Do not connect the appliance 

to the mains until the installation is fully 
complete. 

Before any cleaning or maintenance 

operation, disconnect hood from 
the mains by removing the plug or 
disconnecting the mains electrical 
supply. 

Always wear work gloves for all installation
and maintenance operations.
The appliance is not intended for use by
children or persons with impaired physical, 
sensorial or mental faculties, or if lacking 
in experience or knowledge, unless they 
are under supervision or have been trained 
in the use of the appliance by a person 
responsible for their safety.
This appliance is designed to be operated
by adults, children should be monitored 
to ensure that they do not play with the 
appliance. This appliance is designed to be 
operated by adults.  Children should not be 
allowed to tamper with the controls or play 
with the appliance.
Never use the hood without effectively
mounted grating!
The hood must NEVER be used as
a support surface unless speci

fi

 cally 

indicated.
The premises where the appliance is  
nstalled must be suf

fi

 ciently ventilated, 

when the kitchen hood is used together with 
other gas combustion devices or other fuels.  
The ducting system for this appliance must 
not be connected to any existing ventilation 
system which is being used for any other 
purpose such as discharging exhaust fumes 
from appliances burning gas or other fuels.  
The 

fl

 aming of foods beneath the hood itself 

is severely prohibited.
The use of exposed 

fl

 ames is detrimental 

to the 

fi

 lters and may cause a 

fi

 re risk, 

and must therefore be avoided in all 
circumstances. 
Any frying must be done with care in order 
to make sure that the oil does not overheat 
and ignite.

Caution!

 Accessible parts of the hood 

may became hot when used with 
cooking appliance.

With regards to the technical and safety 
measures to be adopted for fume 
discharging it is important to closely follow 
the regulations provided by the local 
authorities.  The hood must be regularly 
cleaned on both the inside and outside (AT 
LEAST ONCE A MONTH).
This must be completed in accordance 
with the maintenance instructions provided 
in this manual). Failure to follow the 
instructions provided in this user guide 
regarding the cleaning of the hood and 

fi

 lters will lead to the risk of 

fi

 res.

Do not use or leave the hood without the 
lamp correctly mounted due to the possible 
risk of electric shocks.
We will not accept any responsibility for 
any faults, damage or 

fi

 res caused to the 

appliance as a result of the non-observance 
of the instructions included in this manual.

2.

 USE 

The hood serves to aspirate the fumes and 
vapors resulting from cooking.
The attached installation manual indicates 
the version to be used depending on the 
model you have, the suction version with 

external evacuation  

 or 

fi

 ltering with 

internal recirculation 

 .

3.

 INSTALLATION

The mains power supply must correspond 
to the rating indicated on the plate situated 
inside the hood. If provided with a plug 
connect the hood to a socket in compliance 
with current regulations and positioned in 
an accessible area, after installation. If it not 

fi

 tted with a plug (direct mains connection) 

or if the plug is not located in an accessible 
area, after installation,  apply a double 
pole switch in accordance with standards 
which assures the complete disconnection 
of the mains under conditions relating to 
over-current category III, in accordance with 
installation instructions.

Warning! 

Before re-connecting the 

hood circuit to the mains supply and 
checking the efficient function, always 
check that the mains cable is correctly 
assembled.