Bosch Serie | 2 DLN53AA50 - Инструкция по эксплуатации - Страница 17

Cleaning and maintenance       

en

17

2

Cleaning and maintenance

Cl eani ng and  mai ntenance

:

Warning – Risk of burns! 

The appliance becomes hot during operation. Allow the 

appliance to cool down before cleaning.

:

Warning – Risk of electric shock! 

Penetrating moisture may result in an electric shock. 

Clean the appliance using a damp cloth only. Before 

cleaning, pull out the mains plug or switch off the circuit 

breaker in the fuse box.

:

Warning – Risk of electric shock! 

Do not use any high-pressure cleaners or steam 

cleaners, which can result in an electric shock.

Cleaning agents

To ensure that the different surfaces are not damaged 

by using the wrong cleaning agent, observe the 

information in the table. Do not use any of the following:

■

Harsh or abrasive cleaning agents,

■

Cleaning agents with a high alcohol content,

■

Hard scouring pads or cleaning sponges,

■

High-pressure cleaners or steam cleaners.

Wash new sponge cloths thoroughly before use.
Follow all instructions and warnings included with the 

cleaning agents.

Removing and installing the filter

The filter must be serviced regularly in order to 

guarantee efficient filtration of odours and grease.

Metal grease filter

The metal grease filters should be cleaned every 30 

operating hours or at least once a month.

:

Warning – Risk of fire! 

Grease deposits in the grease filter may catch fire.

Clean the grease filter at least once a month.

Never operate the appliance without the grease filter.

Removing metal grease filter

The metal grease filters filter the grease out of kitchen 

steam. To keep them in good working order, the filters 

should be cleaned at least once a month.

1.

Open the lock on the metal grease filters and 

remove the filters from the retainer. 

Notes

– When you do this, take hold of the metal grease 

filters from underneath with your other hand.Make 

sure that the metal grease filters do not fall and 

damage the hob.

– Fat may accumulate in the bottom of the metal 

grease filters. Hold the filters level to prevent fat 

from dripping out.

2.

Clean the metal grease filters.

3.

Clean the inside of the appliance.

Cleaning the metal mesh grease filters

Notes

■

Do not use any aggressive, acidic or alkaline 

cleaning agents.

■

When cleaning the metal mesh grease filters, also 

clean the holder for the metal mesh grease filters in 

the appliance using a damp cloth.

■

The metal mesh grease filters can be cleaned in the 

dishwasher or by hand.

By hand:

Note: 

You can use a special grease solvent for 

stubborn dirt. It can be ordered via the Online Shop.

■

Soak the metal mesh grease filters in a hot soapy 

solution. 

■

Clean the filters with a brush and then rinse them 

thoroughly.

■

Leave the metal mesh grease filters to drain.

Area

Cleaning agent

Stainless steel

Hot soapy water: 

Clean with a dish cloth and then dry with a 

soft cloth.
Clean stainless steel surfaces in the grind 

direction only.
Special stainless steel cleaning products are 

available from our after-sales service or from 

specialist retailers. Apply a very thin layer of 

the cleaning product with a soft cloth.

Painted surfaces

Hot soapy water: 

Clean using a damp dish cloth and dry with a 

soft cloth/towel.
Do not use any stainless steel cleaners.

Aluminium and plastic Glass cleaner: 

Clean with a soft cloth.

Glass

Glass cleaner: 

Clean with a soft cloth. Do not use a glass 

scraper.

Controls

Hot soapy water: 

Clean using a damp dish cloth and dry with a 

soft cloth/towel.
Risk of electric shock caused by penetrating 

moisture.
Risk of damage to the electronics from pene-

trating moisture. Never clean operating con-

trols with a wet cloth.
Do not use any stainless steel cleaners.