AEG DVB5860B - Инструкция по эксплуатации - Страница 29

appliance returns to its previous speed
settings.

When the function is turned
on, additional touch on the

button 

 does not have any

effects.

3.3 

Activating and

deactivating the filter
notification

Filter alarm reminds to change or clean
the charcoal filter and clean the grease

filter. The filter indicator 

 is turned on

(red) for 30 seconds if the grease filter

must be cleaned. The filter indicator 
flashes (red) for 30 seconds if the
charcoal filter must be replaced or
cleaned.

Refer to filter alarm in care
and cleaning chapter.

1.

Switch on the control panel.

2.

Make sure that the icons are turned
off.

3.

To activate or deactivate the charcoal

filter notification touch 

 for 3

seconds.

If the charcoal filter
notification is activated, the

filter icon 

 flashes (red)

five times.

If the charcoal filter
notification is deactivated,

the filter icon 

 flashes (red)

three times.

4. 

CARE AND CLEANING

4.1 

Cleaning the grease filter

Each filter must be cleaned at least once
a month. Filters are mounted with the
use of clips and pins on the opposite
side.

To clean the filter:

1.

Pull the cover to open it.

1

2.

Press the handle of the mounting clip
on the filter panel underneath the
hood (1).

1

2

3.

Slightly tilt the front of the filter
downwards (2), then pull.

Repeat the first two steps for all filters.

4.

Clean the filters using a sponge with
non abrasive detergents or in a
dishwasher.

The dishwasher must be set
to a low temperature and a
short cycle. The grease filter
may discolour, it has no
influence on the
performance of the
appliance.

5.

To mount the filters back follow the
first two steps in reverse order.

Repeat the steps for all filters if
applicable.

(1*/,6+